Destaco 802-U-RC pneumatic toggle clamp is a replacement clamp for the 802-U clamp. This clamp is equipped with an air-actuated cylinder with an input port for connecting to the compressed air source and then utilising the compressed air to apply clamping pressure for holding the workpiece in place. The non-pivoting cylinder can easily be hard-piped into fixtures. It is ideal for quick clamping applications in the automotive and food & packaging industries. This pneumatic toggle clamp incorporates over centre toggle action linkage combined with a pneumatic cylinder to provide a device that is easily adaptable for a wide variety of applications. Destaco 802-U-RC replacement pneumatic toggle clamp is sensor ready for both round and T-slot style sensors and features an in-built flow restriction system, thereby eliminating the need for external flow controls and ensuring smooth clamping. It is a completely self-contained unit & requires just a single pressure source. This pneumatic clamp features an enclosed design for MIG & spot welding in dirty environments. It comes with hardened bushings & pins at all pivot points for long service life. This replacement clamp is capable of withstanding loads up to 200 lb and comes integrated with U-bar clamping arms for keeping workpieces safely in place. Destaco 802-U-RC pneumatic toggle clamp is equipped with a magnetic piston ring for accurate position sensing and an ergonomic handle grip for utmost operator comfort & reducing hand fatigue. It can be operated at temperatures ranging between -14 & 194 degrees F.
Uses:
Destaco 802-U-RC pneumatic power clamp is used for clamping, positioning & holding metal sheets & parts, in fixtures and handling systems in the aerospace, automotive and food & packaging industries.
Features:
- Destaco 802-U-RC pneumatic toggle clamp comprises a pneumatic cylinder that features built-in flow control for smooth operation.
- It comes with a magnetic piston ring for precise position sensing.
- This unit features a sensor ready design to accommodate either T-slot or round sensors.
- Destaco 802-U-RC repalcement clamp is integrated with U-bar clamping arms for keeping workpieces securely in place.
- It is capable of holding loads up to 200 lb.
- This pneumatic toggle clamp is capable of being operated at temperatures ranging from -14 to 194 degrees F.
Compatible Accessories:
- Destaco 802550-20-1-00: These replacement seal kits are designed for unobstructed functioning of the clamps and ensure high performance workholding, automation and containment solutions.
- Destaco 202208-M: These flat tip bonded neoprene spindles are used with Destaco 802-U-RC pneumatic toggle clamp to provide a cushion between clamps & clamped items, thereby securing material to work surfaces in milling, drilling and welding applications. They can be adjusted for accommodating materials of varying thicknesses and can also be replaced for extending the service life of toggle clamps by reducing the risk of marring when rubber stoppers start to wear away.
- Destaco 215105: These flanged washers are used with Destaco 802-U-RC pneumatic toggle clamp for maintaining sufficient load to tighten gaskets and bolts of a flange during clamping. They are made of steel to provide structural rigidity and resist corrosion on exposed surfaces.
Standards and Approvals:
- Destaco 802-U-RC pneumatic toggle clamp meets ISO 9001:2015 and ISO 14001:2015 standards to deliver high quality clamping services.
Installation:
- Destaco 802-U-RC pneumatic toggle clamp features a flanged base with threaded holes for easy and secure installation.
Frequently Asked Questions:
Q. Is Destaco 802-U-RC pneumatic toggle clamp available in a high-temperature version?
A. The high-temperature version is available upon request, add -HT at the end of the model number & request a quote from Raptor Supplies.
Q. What are pneumatic toggle clamps?
A. Pneumatic toggle clamps feature the same basic design and operation as manual hold down or straight line toggle clamps, but are operated pneumatically. They are completely self contained and require only a pressure source hook up.
Q. Which grease is ideal for Destaco clamps during their rebuilding?
A. A coupling grease like Mobil XTC is perfect for use with Destaco mechanical clamps, while the Magnalube G grease should be used with pneumatic cylinder seals.
Q. What is the holding capacity of a clamp?
A. The clamp's holding capacity or holding force signifies the capability of a clamp to hold down mechanical equipment or sheet metal during automotive part assembling or similar manufacturing processes.
Q. What does the red colour of Destaco clamp handles signify?
A. There is no such significance of the red colour of the clamp handle, as it only depicts a recognisable area. This helps operators in finding the handle easily & quickly.
Q. What does clamping force mean?
A. Clamping force is the amount of force actually applied to the workpiece by closing & locking the clamp. It is generally less than the stated holding capacity. The actual clamping force depends on various factors including spindle position (clamping arm length), cylinder area, cylinder bore & available air pressure. In most cases, the clamping force is approximately 2 to 3 times the force exerted by a pneumatic cylinder.
Q. Does Destaco supply any water resistant clamp sensors?
A. Yes, Destaco also offers inductive sensors designed in accordance with IP65 standards to provide protection from powerful hydraulic jets, dust & heavy rain.
Change Country
