Where We Deliver

Email Phone
Onboard Raptor as a vendor

TAP MAGIC Aluminium Cutting Fluids


Tap Magic aluminium cutting fluids are designed for cutting and machining operations on aluminium. They are ideal for tapping, milling, drilling, threading, sawing, turning and boring. These ozone-friendly fluids are completely free of 1, 1, 1 trichloroethane.

Filter
TAP MAGIC 20128AA
TAP MAGIC 20004AB
TAP MAGIC 20640AC
TAP MAGIC 20016AD
TAP MAGIC 23840AE
TAP MAGIC 27040AF
TAP MAGIC 25200ATG
StyleModelCapacityContainer TypePrice (ex. VAT)
A
20128A		1 gal.Can€115.89
B
20004A		4 oz.Can€6.27
C
20640A		5 gal.Pail€497.77
D
20016A		16 oz.Can€19.20
E
23840A		30 gal.Drum€1,612.27
F
27040A		55 gal.Drum€3,258.13
G
25200AT		275 gal.Tote-
RFQ

Aluminium Cutting Fluids

Tap Magic aluminium cutting fluids are designed for cutting and machining operations on aluminium; ideal for tapping, milling, drilling, threading, sawing, turning and boring. These ozone-friendly fluids are completely free of 1, 1, 1 trichloroethane. They dissipate heat rapidly, provide closer tolerances, improve surface finish & machinability, and are highly effective on magnesium & similar non-ferrous metals. Choose from a wide range of these aluminium cutting fluids, available in capacities ranging from 1 to 275 gallons.

Features

  • Tap Magic aluminium cutting fluids dissipate heat rapidly, provide closer tolerances, improve surface finish & machinability and are highly effective on magnesium & similar non-ferrous metals.
  • They are suitable for all cutting operations on aluminium and deliver a beautiful micro-fine finish.
  • They frequently dissipate heat and offer closer tolerances.
  • These aluminium cutting fluids are ozone-friendly and completely free of 1, 1, 1 trichloroethane.
  • They are also highly effective on magnesium and other non-ferrous metals.

Frequently Asked Questions

What is the difference between a coolant and a lubricant?

The main purpose of a coolant is to remove the cutting heat produced from the cutting zone and keep the cutting zone temperature low. Whereas, a lubricant decreases the coefficient of friction between the cutter and the rake surface of the chip, thus decreasing the rate of heat generation.

Is there any difference between a cutting oil and a regular oil?

The key difference is that the cutting fluids can lubricate the interface between the cutting edge of the tool and the chip, whereas lubricants can lubricate between hard materials by decreasing friction between the objects.

What is a cutting oil made of?

They can be produced using petroleum distillates, water, air, plant oils, animal fats and other basic materials. They may be referred to as cutting fluids, cutting oils, cutting compounds, coolants or lubricants, depending on the situation and the kind of metal cutting fluid under consideration.

We are here to help!

Looking for a part not listed here?

Chat with us now

Popular Search Queries

Explore More