EATON Easy500/700 Series Programming Cables


Eaton Easy 500 / 700 Series programming cables are used to connect a computer / programming device to the brand's programmable logic controller (PLC) to program, configure and troubleshoot the PLCs.

Filter
StyleModelPrice (ex. VAT)
A
EASY-PC-CAB
€213.29
B
EASY-USB-CAB
€405.39

Features

  • These cables come with easySoft software to use for programming and configuring the Easy Series PLCs.
  • They have a strain relief component near the connectors to help prevent damage to the cable from frequent bending or pulling.
  • These cables feature front panel programming for eliminating the need to change the wiring.

Standards and Approvals

  • CSA
  • CE
  • EN
  • IEC
  • UL
  • IP20

Frequently Asked Questions

What is the maximum length of these programming cables?

3 metres.

How to maintain Eaton Easy 500 / 700 Series programming cables?

  • When not in use, store the cable in a dry, cool, and dust-free area to prevent damage to its components.
  • Avoid excessive bending or twisting, and use the strain relief component to prevent damage.
  • Wipe connectors with a soft, dry cloth before and after each use to prevent debris accumulation.
  • Regularly inspect for cracks or frayed wires and replace them immediately if any damage is detected.
  • Ensure that the programming cable is compatible with the specific device used for programming and configuring the Easy Series PLCs.

What is the pin configuration of these programming cables?

Eaton Easy 500-700 Series programming cables use a 9-pin D-SUB female connector for connection to the device.

We are here to help!

Looking for a part not listed here?