Item | Sump/Battery Back-Up Combination System |
12VDC Battery Charger | 13 Amps |
Amps | 4 |
Base Material | Non-corrosive Polypro. Strainer (Primary) ABS (Secondary) |
Cord Length | 10 (Primary); 7 1/2 (Secondary) |
Discharge NPT | 1 1/2" |
Duty | Continuous (Primary); Intermittent (Secondary) |
GPH of Water @ 0 Ft. of Head | 3900 (Primary); 4000 (Secondary) |
GPH of Water @ 10 Ft. of Head | 3000 (Primary); 2400 (Secondary) |
GPH of Water @ 15 Ft. of Head | 2520 (Primary) 600 (Secondary) |
GPH of Water @ 5 Ft. of Head | 3540 (Primary); 3100 (Secondary) |
Height | 22.25" |
Housing | Cast Iron Stainless Steel (Primary); ABS (Secondary) |
Housing Material | Cast Iron Stainless Steel (Primary); ABS (Secondary) |
HP | 1/3 |
Impeller Material | Polycarbonite |
Length | 11" |
Max. Dia. Solids | 1/8 |
Max. Flow | 4000 |
Max. Head | 17 |
Max. Liquid Temp. | 104 Degrees F |
Max. Temp. | 104 F |
Mechanical Seal | Buna |
Min. Sump Pit Dia. | 11" |
Motor Type | PSC (Primary); Brush Type DC (Secondary) |
Off Point | 10 Sec. After The Float Drops Which Normally Empties The Pit, 30 Sec. |
On Point | 9 1/2" |
Shaft Material | Stainless Steel |
Shaft Seal | Dual Carbon Ceramic (Primary); Rulon (Secondary) |
Switch Type | Caged Automatic Dual Float |
Top Material | Cast Iron (Primary); ABS (Secondary) |
Voltage | 115 |
Width | 10" |