Item | Sump/Battery Back-Up Combination System |
12VDC Battery Charger | 0.4 Amps |
Amps | 3.8 |
Base Material | Steel (Primary); ABS (Secondary) |
Cord Length | 10 (Primary); 7 1/2 (Secondary) |
Discharge NPT | 1 1/2" |
Duty | Continuous (Primary); Intermittent (Secondary) |
GPH of Water @ 0 Ft. of Head | 4100 (Primary); 2000 (Secondary) |
GPH of Water @ 10 Ft. of Head | 2770 (Primary); 1000 (Secondary) |
GPH of Water @ 15 Ft. of Head | 2580 (Primary) 100 (Secondary) |
GPH of Water @ 5 Ft. of Head | 3000 (Primary); 1420 (Secondary) |
Height | 22.25" |
Housing | Cast Iron, Cast Aluminum (Primary); ABS (Secondary) |
Housing Material | Cast Iron, Cast Aluminum (Primary); ABS (Secondary) |
HP | 1/3 |
Impeller Material | Cast Iron (Primary); ABS (Secondary) |
Length | 11" |
Max. Dia. Solids | 3/16 |
Max. Flow | 2000 |
Max. Head | 15 |
Max. Liquid Temp. | 104 Degrees F |
Max. Temp. | 104 F |
Mechanical Seal | Buna |
Min. Sump Pit Dia. | 12" |
Motor Type | PSC (Primary); Brush Type DC (Secondary) |
Off Point | 10 Sec. After The Float Drops Which Normally Empties The Pit, 30 Sec. |
On Point | 8 3/4" |
Shaft Material | Stainless Steel |
Shaft Seal | Dual Carbon Ceramic (Primary); Rulon (Secondary) |
Switch Type | Caged Automatic Dual Float |
Top Material | Cast Aluminum (Primary); ABS (Secondary) |
Voltage | 115 |
Width | 8.875" |