OETIKER 15400039 Hose Clamp, Band Width 0.27 Inch, Size Range 13.9 mm to 16.1 mm, Pack Of 100

Oetiker 15400039 hose clamp is used to connect tubing and hoses to fittings, to prevent leakage or mount hoses & wires. This hose clamp ensures that uniform pressure is distributed over the circumference of hoses to efficiently secure them to fittings.

Features:

• Oetiker 15400039 hose clamp comes with a pre-shaped insert that delivers effective & all-round sealing during installation.
• The clamp ear has a dimple to compensate for component tolerances, provide adjustable surface pressure and enhance the clamping range, as compared to clamps with no indentations.
• It is provided with a mechanical interlock to keep it closed over a hose and has a single ear for exerting uniform compression.
• It features a one-piece design without any movable parts, for tamper-proof operation and robust & secure connections.
• This Oetiker 15400039 hose clamp has surface technique treated edges for less risk of damage to the hose.
• It provides quick assembly and has a visible deformation that provides evidence of proper closure.

Compatible Accessories:

• HMK 01 Manual Pliers: They are used with Oetiker 154 Series adjustable clamps and have a straight clamping jaw for operation.HO 2000 / 3000 ME Pneumatic Ear Clamp Pincers: They allow uniform installation of Oetiker 154 Series ear clamps. These pincers provide optimum closing force for crimping clamp ears & tightening clamps around hoses. They are suitable for squeezing forces of 2000 / 3000 N.CP 01 Cordless Clamp Pincers: They have a lightweight & ergonomic design for free motion during clamp assembly. They offer unrestricted operation at any location.

Standards and Approvals:

• DIN EN ISO 9227
• ISO 9001:2015
• IATF 16949:2016

Frequently Asked Questions:

Q. How to properly position a hose clamp?

A. Hose clamps come in diverse shapes, styles and sizes. However, the majority of them follow the same process for proper fitting on a hose, tube or pipe fitting. Once the hose is pressed securely onto the mating part, the hose clamp is positioned towards the end of the hose, with approximately 1/4 inch space between the clamp and the end of the hose.

Q. Can Oetiker clamps be reused?

A. Selected models of Oetiker clamps, like universal & screw clamps, can be reused after removing them from hoses that do not require clamping.

Q. What is the difference between a screw and an ear clamp?

A. Screw clamps have an internal screw, bridge & D-nut for tightening them around hoses using a screwdriver. Ear clamps use their single / double ear configuration to crimp a hose under constant jaw force.