Item | Transfer Pump |
Amps | 2A |
Application | for mild chemicals at moderate temperature, eliminates seal-caused friction loss, wear, contamination and leakage |
Bearing Type | Thrust |
Bearings | Thrust |
Capacity | 17.5 GPM |
Cord Length | 6 ft. |
Cord Type | 3-conductor sjp |
Design | Gravity-Feed, Requires The Pump Inlet To Be Lower Than Liquid Level |
Discharge | 1/2" MNPT |
Flow Rate @ 15 Ft. of Head | 10.9 GPM |
Flow Rate @ 18 Ft. of Head | 9.2 GPM |
Flow Rate @ 20 Ft. of Head | 8 GPM |
Flow Rate @ 24 Ft. of Head | 3 GPM |
Flow Rate @ 3 Ft. of Head | 16.5 GPM |
Flow Rate @ 6 Ft. of Head | 15.3 GPM |
Flow Rate @ 9 Ft. of Head | 14 GPM |
Frequency | 60 Hz |
Full Load Amps | 2.00 |
Gasket | Buna-N |
Gasket Material | Buna N |
GPM @ 1 Ft. of Head | 17.5 |
GPM At 1 Feet | 17.5 |
GPM At 15 Feet | 10.9 |
GPM At 20 Feet | 8 |
GPM At 3 Feet | 16.5 |
GPM At 6 Feet | 15.3 |
GPM At 9 Feet | 14 GPM |
GPM of Water @ 15 Ft. of Head | 10.9 |
GPM of Water @ 18 Ft. of Head | 9.2 |
GPM of Water @ 24 Ft. of Head | 4.4 |
GPM of Water @ 3 Ft. of Head | 16.5 |
GPM of Water @ 6 Ft. of Head | 15.3 |
GPM of Water @ 9 Ft. of Head | 14.0 |
Height | 5 1/2" |
Housing | Polypropylene |
Housing Material | Glass Filled Polypropylene |
HP | 1/8 hp |
Hz | 50/60 |
Impeller | Polypropylene |
Impeller Material | Glass Filled Polypropylene |
Inlet | 1" FNPT |
Inlet Size | 1" |
Inlet Type | Fnpt |
Length | 8 4/5" |
Liquid Temperature | 150°F |
Max. Ambient Temp. | 77°F |
Max. Flow Rate @ 60 Hz | 17.5 GPM |
Max. Fluid Temp. | 150°F |
Max. Head | 27.5 ft. |
Max. Outlet Pressure | 11.9 psi |
Max. Specific Gravity | 1.1 |
Max. Viscosity | 100 SSU |
Motor Enclosure | Opfc |
Motor Enclosure Design | Open Fan Cooled |
Motor Type | Permanent Split Capacitor |
Mounting | Horizontal |
Mounting Orientation | Horizontal |
Operating Pressure | 11.9 PSI |
Outlet | 1/2 MPT |
Outlet Size | 1/2" |
Outlet Type | Npt |
Phase | 1 |
Power | 208 W |
Power Cord Length | 6 ft. |
PSI | 11.9 |
RPM | 3000 RPM |
Series | Md-Sc Series |
Shut Off | 27.5 ft. |
Temp (F) @ 0 PSIG | 150 |
Temp (F) @ 10 PSIG | 120 |
Temp (F) @ 20 PSIG | 120 |
Temp (F) @ 30 PSIG | 120°F |
Temp. @ 10 psig | 120°F |
Temp. @ 20 psig | 90°F |
Temp. @ 30 psig | 70°F |
Type | Magnetic Drive |
Voltage | 115V AC |
Warranty | 1 yr. |
Watts | 208 W |
Width | 5 2/5" |