Item | Transfer Pump |
Amps | 1.7A |
Application | For Highly Corrosive Chemicals, Eliminates Seal-Caused Friction Loss, Wear, Contamination And Leakage |
Bearing Type | Thrust |
Bearings | Thrust |
Capacity | 14 GPM |
Cord Length | 6 ft. |
Cord Type | 3-conductor sjo |
Design | Gravity-Feed, Requires The Pump Inlet To Be Lower Than Liquid Level |
Discharge | 1/2" MNPT |
Flow Rate @ 1 Ft. of Head | 14.2 GPM |
Flow Rate @ 15 Ft. of Head | 9.2 GPM |
Flow Rate @ 18 Ft. of Head | 7.5 GPM |
Flow Rate @ 20 Ft. of Head | 4.2 GPM |
Flow Rate @ 24 Ft. of Head | 1 GPM |
Flow Rate @ 3 Ft. of Head | 13.5 GPM |
Flow Rate @ 6 Ft. of Head | 12.8 GPM |
Flow Rate @ 9 Ft. of Head | 11.8 GPM |
Frequency | 60 Hz |
Full Load Amps | 1.70 |
Gasket | FKM |
Gasket Material | Fkm |
GPM @ 1 Ft. of Head | 14.1 |
GPM At 1 Feet | 14.2 |
GPM At 15 Feet | 9.2 |
GPM At 20 Feet | 4.2 |
GPM At 3 Feet | 13.5 |
GPM At 6 Feet | 12 |
GPM At 9 Feet | 11.8 |
GPM of Water @ 15 Ft. of Head | 9.1 |
GPM of Water @ 18 Ft. of Head | 7.2 |
GPM of Water @ 3 Ft. of Head | 13.2 |
GPM of Water @ 6 Ft. of Head | 12.7 |
GPM of Water @ 9 Ft. of Head | 11.8 |
Height | 9" |
Housing | PPS |
Housing Material | Glass Filled Polyphenylene |
HP | 1/10 hp |
Hz | 50/60 |
Impeller | Pps |
Impeller Material | Glass Filled Polypropylene Sulfide With Carbon Bushing |
Inlet | 1" FNPT |
Inlet Size | 1" |
Inlet Type | Fnpt |
Length | 10.9" |
Liquid Temperature | 200°F |
Max. Flow Rate @ 60 Hz | 14 GPM |
Max. Fluid Temp. | 200°F |
Max. Head | 24.3 ft. |
Max. Outlet Pressure | 10.5 psi |
Max. Specific Gravity | 1.1 |
Max. Viscosity | 100 SSU |
Motor Enclosure | Tefc |
Motor Enclosure Design | Totally Enclosed Fan Cooled |
Motor Type | Permanent Split Capacitor |
Mounting | Horizontal |
Mounting Orientation | Horizontal |
Operating Pressure | 10.5 PSI |
Outlet | 1/2 MPT |
Outlet Size | 1/2" |
Outlet Type | Npt |
Phase | 1 |
Power | 178 W |
Power Cord Length | 6 ft. |
PSI | 10.5 |
RPM | 2750/3000 |
Series | Md-Hc Series |
Shut Off | 24.3 ft. |
Temp (F) @ 0 PSIG | 200 |
Temp (F) @ 10 PSIG | 150 |
Temp (F) @ 20 PSIG | 150 |
Temp (F) @ 30 PSIG | 150°F |
Temp. @ 0 psig | 180°F |
Temp. @ 10 psig | 165°F |
Temp. @ 20 psig | 145°F |
Temp. @ 30 psig | 135°F |
Type | Magnetic Drive |
Voltage | 115V AC |
Warranty | 1 yr. |
Watts | 178 W |
Width | 5 1/2" |