55% Thread Drill Size | 12.5 mm, 14.5 mm, 16.2 mm, 5.25 mm, 8.9 mm, 27/64" |
75% Thread Drill Size | 10.3 mm, 12 mm, 5 mm, 8.5 mm |
Case Type | Metal |
Coolant Fed | Non Coolant Through |
Die Finish | Bright Uncoated |
Die Material | High Speed Steel |
Die Material Grade | Carbon Steel |
Die Shape | Round Adjustable |
Die Thread Sizes Included | M14 x 2.0, M16 x 2.0, M18 x 2.5, M6 x 1.0, M8 x 1.75, M10 x 1.5, M12 x 1.75 |
Die Type | Two Piece |
Dimensional Standards | Metric |
Extended Neck | No |
Extended Shank | No |
Extension Tap | No |
Features | Self Alignment |
Finish | Bright Uncoated |
Fits Class | 2B |
Helix Angle | 0° |
Material | High Speed Steel |
Max. Die Thread Size | M18 x 2.5 |
Max. Tap Thread Size | M18 x 2.50 |
Max. Tap Thread Size | M18 x 2.5 |
Min. Tap Thread Size | M6 x 1 |
Number Of Dies In Set | 7 |
Number Of Flutes | 4 |
Number Of Taps | 7 |
Powdered Metal Base Material | No |
Primary Material Application | All Materials |
Secondary Material Application | Stainless Steel |
Spiral Direction | Neutral |
System Of Measurement | Metric |
Tap Chamfer | Plug |
Tap Finish | Bright Uncoated |
Tap Material | High Speed Steel |
Tap Material Grade | M2 |
Tap Shank Standard | Table 302 |
Tap Sizes Included | M10 X 1.5, M12 X 1.75, M14 X 2, M16 X 2, M18 X 2.5, M6 X 1, M8 X 1.75 |
Tap Type | Hand Tap |
Tap Wrench Number | #6 |
Thread Direction | Right Hand |
Thread Limit | D5, D6, D7 |
Thread Sizes Included | M14 x 2, M16 x 2, M18 x 2.5, M6 x 1, M8 x 1.75, M10 x 1.5, M12 x 1.75 |
Thread Type | Metric |