Dynabrade 54363 extended right angle die grinder is ideal for quick material removal, finishing, deburring & polishing in die shops, manufacturing & fabrication sites, foundries, welding application, nuclear facilities and shipyards. It comes with both 1/4 inch and 6 mm collet inserts for attaching carbide burrs, mounted points, rotary files & discs to the unit. This Dynabrade die grinder is right-angled for ease of operation.
Features:
- Dynabrade 54363 extended right angle die grinder has a 0.7 hp (522W) air motor that allows adjustment of tool speeds up to 18000 rpm.
- It has a thermally insulated handle that decreases cold air transmission to the user.
- This Dynabrade 90-degree die grinder is equipped with a safety-lock throttle lever for avoiding accidental tool startup.
- It has a 1/4 inch NPT female connection that accepts an air hose with an internal diameter of 3/8 inches for accepting 41 SCFM compressed air at pressures below 90 PSIG.
- This Dynabrade die grinder having a rear exhaust produces sounds up to 80 dB(A).
Compatible Accessories:
- Dynabrade 10681 Air Filter-Regulator-Lubricator Systems: These FRL systems regulate air pressure, filter water contaminates and lubricate this grinder.
- Dynabrade 95842 Air Lube: This lubricant prevents the formation of rust or sludge.
- Dynabrade 94994 Over Hose Assembly: This over-hose assembly attaches to this grinder unit to direct the exhaust away from the user.
- Dynabrade 96680 Motor Tune-Up Kit: It contains assorted parts for maintaining & repairing the unit's motor.
Standards and Approvals:
Frequently Asked Questions:
Q. What is this Dynabrade 54363 extended right angle die grinder made of?
A. This Dynabrade die grinder has lightweight, composite construction with an aluminium head for corrosion resistance.
Q. What does extended design mean in this Dynabrade die grinder?
A. This Dynabrade 54363 grinder has an extended design for reaching an additional length of 3-3/8 inches (86 mm).
Q. How to install this Dynabrade extended right angle die grinder?
A.
- Dynabrade angle die grinder should be connected to its dedicated hose that is further attached to an air supply manifold with quick disconnects for reducing contamination into the tool.
- Connect the tool to the air power source with inlet pressure below 90 PSIG.
- The air supply should pass through a filter-regulator-lubricator unit to prevent unclean / wet air, regulating air pressure & lubricating unit's pneumatic components.
Change Country
