| Item | Centrifugal Pump |
| Amps | 8.2-7.4/3.7 |
| Bearing Type | Ball |
| Best Efficiency Flow Range @ Head | 51 To 37 Gpm @ 93 To 155 Ft. |
| Best Efficiency Flow Rate | 99-155 GPM |
| Best Efficiency GPM @ Head | 119 @ 46 Ft. |
| Best Efficiency Head | 37 ft. to 51 ft. |
| Best Efficiency Range GPM @ Head | 51 to 37 @ 93 to 155 Ft. |
| Drain Plug | 3/4"-14 NPT |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Flow Rate @ 10 Ft. of Head | 241 GPM |
| Flow Rate @ 15 Ft. of Head | 227 GPM |
| Flow Rate @ 20 Ft. of Head | 213 GPM |
| Flow Rate @ 25 Ft. of Head | 197 GPM |
| Flow Rate @ 30 Ft. of Head | 180 GPM |
| Flow Rate @ 40 Ft. of Head | 144 GPM |
| Flow Rate @ 50 Ft. of Head | 100 GPM |
| Flow Rate @ 60 Ft. of Head | 42 GPM |
| For Use With Potable Systems | No |
| Frame | 182Jm |
| Frame Size | 182Jm |
| Frequency | 60 Hz |
| GPM of Water @ 10 Ft. of Head | 241 |
| GPM of Water @ 15 Ft. of Head | 227 |
| GPM of Water @ 20 Ft. of Head | 213 |
| GPM of Water @ 25 Ft. of Head | 197 |
| GPM of Water @ 30 Ft. of Head | 180 |
| GPM of Water @ 40 Ft. of Head | 144 |
| GPM of Water @ 50 Ft. of Head | 100 |
| GPM of Water @ 60 Ft. of Head | 42 |
| Height | 12 3/5" |
| Housing Material | Stainless Steel |
| HP | 3 hp |
| Hz | 60 |
| Impeller Material | Stainless Steel |
| Impeller Type | Semi Open |
| Inlet | 3" |
| Inlet Pressure | 100 psi |
| Inlet Size | 3" |
| Inlet Type | Npt |
| Length | 26 1/2" |
| Max. Case Pressure | 125 psi |
| Max. Dia. Solids | 3/8" |
| Max. Flow Rate | 241 GPM |
| Max. Flow Rate @ Head | 241 Gpm @ 10 Ft. |
| Max. Fluid Viscosity | 100 SSU |
| Max. GPM @ Head | 241 @ 10 Ft. |
| Max. Head | 65 ft. |
| Max. Liquid Temp. | 180 F |
| Max. Media Temp. | 180°F |
| Max. Pressure | 28.1 psi |
| Max. Solid Dia. | 3/8" |
| Max. Specific Gravity | 1 |
| Max. Suction Lift | 20 ft. |
| Media Type | Non Flammable Liquids |
| Min. Flow Rate | 42 GPM |
| Min. Flow Rate @ Head | 42 Gpm @ 60 Ft. |
| Min. GPM @ Head | 42 @ 60 ft. |
| Min. Head | 10 ft. |
| Motor Enclosure | TEFC |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor RPM | 3450 |
| Motor Type | Three Phase |
| NEMA/IEC Frame | 182JM |
| Outlet | 3" |
| Outlet Size | 3" |
| Outlet Type | Npt |
| Phase | 3 |
| Port Rotation | none |
| Priming | Self Priming |
| Pumping Application | Decorative Water, Dewatering, Irrigation, Liquid And Chemical Transfer |
| RPM | 3500 RPM |
| Screw Material | Stainless Steel |
| Seal Application | Non-Flammable And Non-Abrasive Liquids Compatible With Seal Component Materials Up To 200 Deg. F |
| Seal Material | Carbon Ceramic-Viton |
| Seal Type | Mechanical |
| Service Factor | 1.25 |
| Shaft Material | Steel w/Stainless Steel |
| Suction Lift | 20 ft. |
| Thread Size | 3/4"-14 |
| Type | Self-Priming |
| Voltage | 208-230/460 |
| Volute Material | Stainless Steel |
| Warranty | 1 yr. |
| Wetted Materials | Stainless Steel,Buna N, Carbon, Ceramic, |
| Width | 10" |
Change Country
