Chronomite Labs M-20L/208 tankless water heater is designed for under-sink use in potable water applications. It provides hot water on demand without a storage tank, eliminating the need for constant heating and reheating of water.
Features:
- It features vandal-resistant, cast aluminium housing for superior strength & durability, resistance to high temperatures and corrosion prevention in harsh environments.
- It provides hot water at 0.4 GPM with a minimum pressure of 25 psi, thereby reducing hot water delivery time and inefficient use of electricity.
- It comes with an integrated microprocessor to maintain constant output temperature with varying flow rates.
- It incorporates a unique power switch that automatically applies electrical current to a series of ingeniously designed coils that instantly heat water as it flows through the equipment.
- This Low-Flow Series tankless heater is ideal for sensor / hands-free faucets having a temperature preset of 104 deg F, as well as public lavatories, kitchen / bar sinks, dishwashers & photo processing boosters.
- It includes compression fittings and faucet flow control.
Standards and Approvals:
Frequently Asked Questions:
Q. How does the product reduce scalding?
A. The heater's ultra-quick response time controls hot water temperatures, thereby eliminating the risk of scalding and the need for mixing valves.
Q. What is Omni faucet flow control?
A. Chronomite Omni Series faucet flow control incorporates Laminar Flow technology that produces a crystal clear, non-splashing stream of water to reduce water wastage up to 90%.
Q. How to install this Chronomite water heater?
A.
- Turn off the breaker and disconnect the electrical supply to the area. Also, shut off the water supply to the fixture.
- Access electrical connections within by unscrewing and removing the front face plate.
- Mount the Chronomite unit in the desired location using heavy-duty metal screws, making sure to pull existing wires through the supplied hole at the back of the heater.
- Connect electrical supply wires to the electrical connections. Secure all connections tightly.
- Close the face plate and screw it on.
- Connect the Cold Water supply line from the water source to the bottom Cold/Hot inlet compression fitting opening.
- Connect the Hot Water supply line from the top Cold / Hot inlet compression fitting opening on the Chronomite unit.
- Reopen the water supply line to the unit and turn on the sink 2 to 3 minutes to purge air from the lines.
- Screw the flow control (included) onto the faucet / fixture head. Once purged, turn on the breaker to start the process.
Q. What safety precautions should I take when using this Chronomite M-20L/208 electric tankless water heater?
A.
- Hire a qualified professional for installation, adhering to local electrical and plumbing codes.
- Turn off power at the circuit breaker before performing any electrical work on the water heater.
- Set a safe water temperature to prevent scalding, with the maximum delivered temperature capped at 160 degrees F.
- Ensure proper ventilation in the installation area to prevent overheating and maintain safe operating conditions.
- Monitor and maintain recommended water pressure levels for efficient and safe water heater operation.
- Perform regular maintenance checks according to the manufacturer's guidelines to address issues promptly.
- Consider installing a water softener to prevent mineral buildup inside the unit and ensure long-term efficiency.
- Know the location of the emergency shut-off valve for quick response in case of issues or emergencies.
- Regularly check for leaks around the unit and promptly address any issues to prevent water damage and electrical hazards.
Q. What safety precautions should I take when using this Chronomite M-20L/208 electric tankless water heater?
A.
- Hire a qualified professional for installation, adhering to local electrical and plumbing codes.
- Turn off power at the circuit breaker before performing any electrical work on the water heater.
- Set a safe water temperature to prevent scalding, with the maximum delivered temperature capped at 160 degrees F.
- Ensure proper ventilation in the installation area to prevent overheating and maintain safe operating conditions.
- Monitor and maintain recommended water pressure levels for efficient and safe water heater operation.
- Perform regular maintenance checks according to the manufacturer's guidelines to address issues promptly.
- Consider installing a water softener to prevent mineral buildup inside the unit and ensure long-term efficiency.
- Know the location of the emergency shut-off valve for quick response in case of issues or emergencies.
- Regularly check for leaks around the unit and promptly address any issues to prevent water damage and electrical hazards.
Q. What are the factors to consider while choosing this tankless water heater?
A. Major factors include flow rate, temperature rise, power requirements, installation space, energy efficiency, temperature control, certifications, water pressure compatibility and maintenance needs.
Change Country
