Midspan power injectorssupply power and pass on data (text, audio and video) when connected directly with Power-over-Ethernet (PoE) devices or with non PoE devices through a separate adapter. Altronix NetWay1D indoor single port midspan injector uses Power-over-Ethernet (PoE) technology for enabling network cables to carry both electrical power & data simultaneously. The PoE compliant devices can be at a maximum distance of 100 m from the midspan NetWay1D injector. The NetWay1D power injector gets its power supply through an IEC 320 connector (located at the backside of the device), having a voltage rating of 115VAC (at 1.2A) and 230VAC (at 0.75A). This device delivers PoE (15W), PoE+ (30W) and Hi-PoE (60W) power outputs using all 4 pairs of ethernet cable (CAT5e) at a data transmission speed of 10 / 100 / 1000 Mbps. It is also equipped with an auxiliary power connector having 56VDC / 60W output rating for safely transmitting data and power over a coax cable of length up to 500 m. This auxiliary Class 2 rated power limited output is used by Altronix eBridge Plus receivers to provide a cost effective way for replacing legacy analog devices with new IP devices / cameras over existing coax cables. NetWay1D power injector reduces extra wiring as it transmits data & power over ethernet / data cable that is already in place instead of installing additional power sockets for each of the devices. It has a lightweight & compact body for installation in indoor locations with limited space. This injector comes with numerous safety features like surge protection, auto-detection & protection facility of legacy non-PoE cameras / devices and LED indicators for port status, PoE status & IP link status.Raptor Supplies also offers Netway1XPmidspan power injector having shutdown triggers for manually shutting down power transmission to the PoE devices.
Uses:
Altronix NetWay1D can be connected to PoE cameras, fixed IP cameras, VoIP phones, wireless access points & networked audio devices to provide PoE, PoE+ and Hi-PoE in offices, commercial buildings & industrial spaces.
Features:
- Altronix NetWay1D injector is powered using a grounded AC line cord to deliver 115VAC (60Hz, 1.2A) or 230VAC (50 / 60Hz, 0.75A) input power.
- It has two RJ45 PoE ports to connect 4 pair CAT5e or higher efficiency cables, one from video server and another towards IP cameras.
- The [Out] port of the device transfers data to PoE devices at a data transmission speed of 10 / 100 / 1000 Mbps.
- This IEEE 802.3af, IEEE 802.3at & Hi-PoE compliant port provides a power rating of 15, 30 & 60W, respectively.
- It can transfer data and power up to a distance of 100 m.
- This devices also offers an Aux. Class 2 power limited output rated at 56VDC / 60W for replacing legacy analog devices with new IP devices / cameras over existing coax cables.
- It is equipped with various safety features like surge protection, auto negotiation and auto detection & protection facility of legacy non-PoE cameras / devices.
- This midspan injector is equipped with LED indicators, such as red for port & PoE status and yellow & green for IP link status.
- It operates at temperatures ranging from -30 to 50 degrees C (at 30W power) and -30 to 40 degrees C (at 60W power).
Compatible Accessories:
- Altronix eBridge Plus receivers can be used to pass Aux. Class 2 power limited output from Altronix NetWay1D power injector over coax cable to an enabled IP camera / device .
Standards and Approvals:
- Altronix NetWay1D midspan power injector is UL & cUL listed (for Information Technology Equipment; UL 60950-1) & CE marked (European Conformity) for ensuring enhanced performance and user safety.
Installation:
- Altronix NetWay1D injector is securely mounted on table or desktop in indoor locations.
- Then, a grounded AC line cord (included) is plugged into the IEC 320 connector of the NetWay1D unit using a reliable earth grounded socket. A receptacle controlled by a switch should not be connected to the power supply of the unit.
- Two structured cables can be used to connect the [IN] port to a UL-listed ethernet switch or a video server and the [OUT] port to the PoE device.
- Port status & PoE On LED indicators will illuminate once the PoE device is turned on.
- The devices requiring auxiliary power are linked to the marked terminals [+AUX–].
Frequently Asked Questions:
Q. Can we connect any PoE device to the Netway1D power injector?
A. Altronix Netway1D is compatible with PoE devices requiring power supply ratings of 15, 30 & 60W.
Q. What kind of input power supply is required in Netway1D?
A. It is recommended to use a grounded AC line cord to deliver universal power input at 115VAC (1.2A) or 230VAC(0.75A).Q. What is a midspan power injector?A. Midspan power injectors are PoE devices that connect a data server with a PoE-capable device (such as an IP camera). These injectors add (or inject) power to an ethernet or data cable for powering PoE devices without connecting each device to a separate power supply.
Q. How far can power injectors work?
A. Netway1D PoE injector can transfer both power and data to powered devices at a maximum distance of 100 m.
Q. What are the advantages of midspan power injectors?
A. PoE injectors or midspan power injectors deliver power & data to PoE devices with greater reliability, faster transmission speed and better security compared to WiFi enabled cameras. These PoE injectors also reduce the wirings associated with directly powered devices.
Change Country
