Altronix NetWay1BT single port midspan injector provides PoE up to 90W power per port and transfers data (text, audio & video) at speeds up to 1000 Mbps to PoE compliant devices like IP cameras, wireless access points, VoIP phones and other high power network devices which are located at a distance up to 100 meters from the injector. It features a standard network cable (CAT5e or higher), along with 4 pair configuration to deliver power & data, and accommodates RJ45 auto crossover ethernet connectivity for strong and speedy connections. The NetWay1BT PoE injector also offers protection and auto detection of legacy to non PoE devices by using 115 / 230VAC voltage connection, hence ensuring maximum safety to the equipment. It further comes with PoE mode and power LED indicators to permit easy monitoring of the actual time of PoE power usage of connected devices. These LED indicators come in red, yellow & green colours depicting PoE ON, power ON and IP link status, respectively. Altronix PoE injector is capable of operating at temperatures ranging from -22 degrees to 167 degrees Fahrenheit. It performs well at altitudes up to 609.6 meters in non condensing humidity ranging between 20 and 85 per cent.
Uses:
Altronix NetWay1BT single port midspan injector can be connected to both PoE and non-PoE devices like PoE cameras, IP cameras, VoIP phones, wireless access points and other high power network devices.
Features:
- Altronix NetWay1BT single port midspan PoE injector is designed to provide PoE / POE+ and Hi-PoE up to 90W power per port.
- This unit requires 115VAC / 230VAC input power.
- It is also used for transferring data (text, video and audio) at speeds up to 1000 Mbps to PoE compliant devices such as security cameras, devices, wireless access points and VoIP phones, irrespective of the distance (up to 100 meters).
- This PoE injector is equipped with safety features, enabling short circuit protection and auto detection of legacy to non PoE cameras / devices by using 115 / 230VAC low voltage connection, hence ensuring maximum safety of the equipment.
- It is equipped with a standard network cable (CAT5e or higher), along with 4 pair configuration to deliver both power and data.
- NetWay1BT midspan injector can accommodate RJ45, auto crossover ethernet connectivity for strong and speedy connections.
- It is supplied with PoE mode and power LED indicators for easy monitoring of the actual time of PoE power usage, of the connected powered devices.
- The red indicators depict PoE ON & power ON position; while yellow and green colours indicate IP link status.
- The CE approved & IEEE 802.3bt compliant port can perform at altitudes up to 609.6 meters in non condensing humidity ranging between 20 and 85 per cent.
- Altronix PoE injector is capable of operating at temperatures ranging from -22 degrees to 167 degrees Fahrenheit.
Compatible Accessories:
- Altronix CAT5e: These Altronix cables are designed for the brand's NetWay1BT PoE injector to transfer data (audio, visual and text) at high speeds.
- Altronix RJ45: These ethernet connectors enable strong and speedy connection of the devices.
- Altronix NetWay1 midspan power injector extends the data range by an additional 100 m, to get a maximum range of 600 m using multiple repeaters based on the device port requirements.
Standards and Approvals:
- Altronix NetWay1BT PoE injector meets international standards as it is CE certified (European Conformity).
Installation:
- Mount NetWay1BT injector in the required location only on a table or desktop.
- Plug the grounded AC line cord (included) into the IEC 320 connector of the NetWay1BT unit. Then, plug the unit into a reliable earth grounded socket. While using multiple units at the same time, the sum of the individual nameplate ratings should not exceed the supply circuit rating. Further, do not connect to a receptacle controlled by a switch.
- Connect the structured cable from the UL listed ethernet switch or video server to RJ45 jack marked (IN) and PoE device to RJ45 jack marked (OUT) on NetWay1BT.
- PoE ON LED indicator will illuminate, indicating the PoE device status that it is turned ON.
- Then, finally connect the device so that it is to be powered to terminals marked (+ Aux. –).
Frequently Asked Questions:
Q. What is a midspan power injector?
A. Midspan power injectors are PoE devices that connect a non PoE capable switch or data server with a PoE capable device (such as VoIP phones or IP cameras). In other words, these injectors add (or inject) power to an ethernet or data cable for powering PoE devices without connecting each device with a separate power supply.
Q. Can we connect any PoE device to the Netway1 power injector?
A. Altronix Netway1 is compatible with PoE devices requiring power supply ratings up to 15.4W.
Q. How much time does it take to return to normal operation from PoE shutdown mode?
A. It takes around 4 seconds to return to normal operation after PoE shutdown.
Q. What kind of input power supply is required in Netway1?
A. It is recommended to use a UL-listed access control limited power supply (for UL294 applications) or Class 2 rated transformer / power supply (for UL60950-1 applications).
Change Country
