DAYTON Wire Rope Clips | Raptor Supplies

DAYTON Wire Rope Clips


Filter
StyleModelFinishMaterialMin. Number Of ClipsMin. TorqueRope Turn BackWire Rope Dia.Price (ex. VAT)
A
2VKJ7
------€5.39
A
2VKJ2
------€1.72
B
2VKH9
GalvanizedMaleable Iron34-1/2 ft.-lb.3.25"1/8"€0.99
C
2VKJ1
GalvanizedMaleable Iron37-1/2 ft.-lb.3.75"3/16"€1.21
C
2VKJ4
GalvanizedMaleable Iron345 ft.-lb.6.5"3/8"€5.19
C
2VKJ5
GalvanizedMaleable Iron365 ft.-lb.7"7/16"€3.05
C
2VKJ6
GalvanizedMaleable Iron465 ft.-lb.11.5"1/2"€3.75
C
2VKJ8
GalvanizedMaleable Iron495 ft.-lb.12"5/8"€6.17
C
2VKJ9
GalvanizedMaleable Iron5130 ft.-lb.18"3/4"€7.92
C
2VKK1
GalvanizedMaleable Iron5225 ft.-lb.20"7/8"€11.19
C
2VKK2
GalvanizedMaleable Iron6225 ft.-lb.26"1"€12.09
C
2VKJ3
GalvanizedMaleable Iron330 ft.-lb.5.25"5/16"€1.79
D
2VKH1
Natural304 Stainless Steel37-1/2 ft.-lb.3.75"3/16"€6.69
D
2VKH3
Natural304 Stainless Steel315 ft.-lb.4.75"1/4"€9.18
D
2VKH5
Natural304 Stainless Steel330 ft.-lb.5.25"5/16"€13.79
D
2VKH7
Natural304 Stainless Steel345 ft.-lb.6.5"3/8"€16.80
D
2VKG6
Natural304 Stainless Steel34-1/2 ft.-lb.3.25"1/8"€5.66

Wire Rope Clips

Dayton wire rope clips create a load bearing eye at the end of a wire rope / cable to help secure the ends when turning back to form a loop. These steel / iron clips can accommodate uncoated ropes with diameters ranging between 1/8 & 7/8 inches. They feature a U-shaped bolt, double saddle & 2 nuts to allow full-arch wrench swing for quick installation, retightening and to prevent kinking effect. Choose from a wide range of these wire rope clips available in minimum torque rates ranging from 4-1/2 to 130 ft-lb.

We are here to help!

Looking for a part not listed here?