DAYTON DC Gearmotors, Permanent Magnet Motor Design


Filter
StyleModelBearingsFull Load AmpsGear RatioGear TypeInput HpLength Less ShaftLubricationMax. TorquePrice (ex. VAT)
A
1LPX8
Ball and Needle on Case, Ball on Motor1.1010:1Hardened Steel, 1st Stage Helical, Subsequent Stages Spur1/108.875"Grease Filled30.0 in.-lb.€479.36
A
1LPY1
Ball and Needle on Case, Ball on Motor1.1037:1Hardened Steel, 1st Stage Helical, Subsequent Stages Spur1/108.875"Grease Filled105.0 in.-lb.€526.42
A
1LPY2
Ball and Needle on Case, Ball on Motor1.1055:1Hardened Steel, 1st Stage Helical, Subsequent Stages Spur1/108.875"Grease Filled156.0 in.-lb.€520.99
B
6Z409
Heavy Duty Ball and Thrust Balls on Case, Ball on Motor2.7041:1Hardened Steel, 1st Stage Helical, Subsequent Stages Spur1/411.75"Permanent Heavy Fluid Gear Oil353.0 in.-lb.€981.33
B
6Z410
Heavy Duty Ball and Thrust Balls on Case, Ball on Motor2.7028:1Hardened Steel, 1st Stage Helical, Subsequent Stages Spur1/411.75"Permanent Heavy Fluid Gear Oil238.0 in.-lb.€914.05
B
6Z411
Heavy Duty Ball and Thrust Balls on Case, Ball on Motor2.7019:1Hardened Steel, 1st Stage Helical, Subsequent Stages Spur1/411.75"Permanent Heavy Fluid Gear Oil152.0 in.-lb.€1,100.50
B
6Z412
Heavy Duty Ball and Thrust Balls on Case, Ball on Motor2.7012:1Hardened Steel, 1st Stage Helical, Subsequent Stages Spur1/411.75"Permanent Heavy Fluid Gear Oil101.0 in.-lb.€850.34
C
6Z910
Needle on Case Output Shaft, Ball on Motor0.36702:11st Stage Steel, Helical, Subsequent Stages Steel or Heat Treated Powdered Metal Spur1/407.375"Permanent Heavy Fluid Gear Oil100 in.-lb.€466.60
D
4ZJ45
Needle with Thrust Ball on Output Shaft, Ball on Motor2.50216:1Hardened Steel1/810.375"Permanent Heavy Fluid Gear Oil310.0 in.-lb.€617.16
D
4ZJ46
Needle with Thrust Ball on Output Shaft, Ball on Motor4.5088:1Hardened Steel1/810.375"Permanent Heavy Fluid Gear Oil254.0 in.-lb.€611.26
D
4ZJ47
Needle with Thrust Ball on Output Shaft, Ball on Motor5.4528:1Hardened Steel1/810.375"Permanent Heavy Fluid Gear Oil113.0 in.-lb.€615.36
D
4ZJ48
Needle with Thrust Ball on Output Shaft, Ball on Motor5.4515:1Hardened Steel1/810.375"Permanent Heavy Fluid Gear Oil60.0 in.-lb.€586.92

DC Gearmotors, Permanent Magnet Motor Design

Dayton DC gearmotors use DC power source to provide high torque and variable speed control, especially where space & power are limited. These units feature parallel shaft orientation to choose the ratio & torque required for specific operations, such as conveyor systems, wheel chairs, hospital beds, table lifts and power seats. They consist of a motor, gear and bearings to smoothly change the direction at low speeds and handle sudden stops, without causing wear to the moving parts. These gearmotors also feature TENV (totally enclosed non-ventilated) enclosures to restrict circulation of outside air and contaminants and can be easily mounted in small spaces in multiple positions. Choose from a wide range of these DC gearmotors, available in 1/8, 1/4 and 1/10 hp motor power ratings.

We are here to help!

Looking for a part not listed here?