DAYTON Plug In Utility / Dewatering Pumps


Filter
Bearing Type: Double Ball , Cord Size: 16/3 , Cord Type: SJT-CR , Duty: Continuous , Function: Pumps Drain Standing Water Down to 3/8 Inhes Depth to Dewater Shallow Flooded Areas such as Basements, Window Wells, Rooftops, Ponds and Stock Tanks , GPM of Water @ 40 Ft. of Head: 26 , Handle: Top Carrying , Hz: 60 , Max. Liquid Temp.: 104 Degrees F , Motor Enclosure: TENV , Motor RPM: 3450 , Motor Type: PSC , Phase: 1 , RPM: 3450 , Thermal Protection: Automatic , Type: Chemical Resistant Submersible , Voltage: 115
StyleModelHousing MaterialGPM of Water @ 25 Ft. of HeadAmpsCord LengthDiameterGPM of Water @ 10 Ft. of HeadGPM of Water @ 15 Ft. of HeadGPM of Water @ 20 Ft. of HeadPrice (ex. VAT)
A
3YU54
Polypropylene-1.5 AC10ft.6"116-€142.34
A
3YU55
Polypropylene-2.6 AC10ft.6"2314.25€181.83
B
1XHV4
Stainless Steel274.7 AC20ft.9.125"645140€931.31
B
1XHV5
Stainless Steel5311.3 AC20ft.10.375"826961€1,560.48

Plug In Utility / Dewatering Pumps

Dayton plug-in utility / dewatering pumps are used to transfer moderate amounts of water in areas where electrical outlets are not present. They feature stainless steel / polypropylene construction to resist chemicals & moisture. These pumps drain standing water down to 3/8 inches depth, for dewatering window wells, basements, ponds, stock tanks & rooftops. They are equipped with double ball bearings to bear radial & axial loads in both directions, and are available in cord lengths of 10 & 20 feet.

We are here to help!

Looking for a part not listed here?