DAYTON Convertible Jet Pumps


Filter
Bearing Type: Permanently Lubricated Ball , Compliance: CSA-US , Duty: Continuous , Frame: 56J , GPM @ 20 PSI: 55 , Housing Material: Cast iron , Hz: 60 , Impeller Material: Brass , Impeller Type: Closed , Max. Pressure: 40 psi , Motor Enclosure: ODP , Motor RPM: 3450 , Motor Type: Capacitor Start , Outlet: 1" NPT , Phase: 3 , Seal Material: Stainless Steel, Buna, Carbon/Silicon Carbide , Seal Type: Mechanical , Stages: 1 , Type: High-Volume , Voltage: 115/230 , Wetted Materials: Brass, Cast Iron, Stainless Steel, Buna N, Carbon, Ceramic
StyleModelLengthMax. Inlet PressureAmpsMaterialMax. Case PressureHeightSuction LiftWidthPrice (ex. VAT)
A
5UXK3
14 13/16"123 PSI10.8/5.5Cast Iron123 PSI8"90 Ft.9 1/8"€627.43
A
5UXK4
16.687"123 PSI18/9Cast Iron123 PSI8.687"110 Ft.9.812"€790.64
A
5UXK5
16.687"123 PSI20/10.5Cast Iron123 PSI8.687"140 Ft.9.812"€760.95
A
5UXK6
17.5"123 PSI21.5/11Cast Iron123 PSI8.687"140 Ft.9.812"€900.85
B
4HEZ4
18"75 PSI10.0/4.8Thermoplastic144 PSI12"60 Ft.12"€714.43
B
4HEZ5
18"75 PSI10.8/5.5Thermoplastic136 PSI12"80 Ft.12"€712.94
B
4HEZ6
19"75 PSI17.0/8.5Thermoplastic141 PSI12"100 Ft.12"€849.53
B
4HEZ7
19"75 PSI19.0/9.5Thermoplastic142 PSI12"110 Ft.12"€899.40

Convertible Jet Pumps

Dayton convertible jet pumps are used in deep or shallow wells to provide water supply without a municipal water source. They are attached to an ejector, tank and a control panel to instinctively supply water when required. These jet pumps are usually mounted above ground for maintenance and repair in comparison to submersible well pumps that are placed in the well and required to be removed from the well for examination. Choose from a range of these convertible jet pumps, available in 8, 8.687 and 12-inch heights.

We are here to help!

Looking for a part not listed here?