CHERNE Petro Econ-O-Grip Plugs

How to install these Petro Econ-O-Grip plugs?

Users need to insert these plugs into the cleanout tee or desired pipe after loosening the wing nut. Then they can tighten the wing nut for finishing up the installation.

How to remove these Petro Econ-O-Grip plugs?

Users should first remove backpresure on these Cherne Petro Econ-O-Grip plugs before loosening or removing the plug. Then, loosen the wing nut on the unit and remove the plug from the pipe or cleanout tee.

What are the points to remember before installing these plugs?

• Select a plug having the proper size according to the pipe size.
• Make sure the maximum back pressure of the plug matches the application requirements.
• Clean the selected plug with a mild soap & water without using any cleaning agent. Clean the pipe and the application area of any foreign substance to reduce plug damage.
• Check the plug for any crack, corrosion, abrasion, cut, leaks or loose fittings.
• These plugs are not recommended for pressure tests.

How to store these Cherne Petro Econ-O-Grip plugs?

These plugs must be stored in a dry place below 110 degrees F and away from sunlight & ozone or ultra-violet light sources. They can be suspended vertically or placed horizontally for storage.