Water Pressure Reducing Valves

Features

Wilkins Water Pressure Reducing Valves

• They control high inlet pressures and then bring them down to a lower value (25 - 75 PSI).
• These valves feature a direct-acting integral by-pass facility to prevent excessive pressure build-up caused by thermal expansion.
• They are made of low-lead bronze and are useful in potable water applications.

Apollo 36ELF Series Valves

• They feature a balanced piston design enabling the regulator to respond to changes quickly in the system flow demands.
• These valves have a built-in thermal expansion bypass to prevent any reverse flow of water back into the system mains.
• Their dezincification-resistant bronze body, stainless steel adjusting screw and dielectric polymer cage provide optimum corrosion resistance.

Watts LFN45B-EZ Series Valves

• Their standard bypass feature allows the water to flow back through the valve into the main when pressures exceed the pressure in the main supply.
• These water pressure reducing valves feature lead-free cast copper silicon alloy construction that can handle temperatures within the range of 33 to 180 degrees F.

Working Mechanism

• Locate the water pressure reducing valve. It is installed near the main water line where it enters the building.
• Identify the adjustment mechanism on the valve. It is usually a screw or a knob located on top or at the side of the valve.
• Using a screwdriver or wrench, turn the adjustment screw or knob clockwise to increase the outlet pressure or counterclockwise to decrease it.
• Make small adjustments and periodically check the outlet pressure using a pressure gauge.
• Once you have set the desired outlet pressure, ensure that the adjustment mechanism is securely tightened to prevent unintentional changes.