LINN GEAR Tapered And QD Bushings

Filter

LINN GEAR -

Taper-Lock Series Bushings, Steel

LINN GEAR 1610sA
StyleModelPrice (ex. VAT)
A1610s€50.76
A1615s€52.82
A2012s€68.60
A2517s€84.38
A2525s€150.92
A3020s€190.37
A3030s€277.83
A3535s€394.45
A4040s€634.55
A4545s€788.90
LINN GEAR -

Taper-Lock Series Bushings, Stainless Steel

LINN GEAR 1610ssA
StyleModelPrice (ex. VAT)
A1610ss€152.29
A2012ss€205.80
A2517ss€253.82
A3020ss€380.73
A1615SS€158.47
LINN GEAR -

Taper-Lock Series Bushings

LINN GEAR 1008X.500A
StyleModelPrice (ex. VAT)
A1008X.500€19.89
A3030X1.625€92.61
A3030X2.250€92.61
A3030X2.187€92.61
A3030X2.125€92.61
A3030X2.062€92.61
A3030X2.000€92.61
A3030X1.937€92.61
A3030X1.875€92.61
A3030X1.812€92.61
A3030X1.750€92.61
A3030X1.687€92.61
A3030X1.562€92.61
A3030X2.375€92.61
A3030X1.500€92.61
A3030X1.437€92.61
A3030X1.375€92.61
A3030X1.312€92.61
A3030X1.250€92.61
A3030X1.187€92.61
A3030X1.125€92.61
A3030X1.000€92.61
A3030X.937€92.61
A3020X30€63.46
A3020X3.000€63.46
See more
LINN GEAR -

Q.D. Bushings

LINN GEAR EX.875A
StyleModelPrice (ex. VAT)
AEX.875€118.68
ASDSX1.812€29.67
ASDX.750€35.67
ASDX.687€35.67
ASDX.625€35.67
ASDX.562€35.67
ASDX.500€35.67
ASDSX2.000€29.67
ASDSX1.937€29.67
ASDSX1.875€29.67
ASDSX1.750€29.67
ASDX.875€35.67
ASDSX1.687€29.67
ASDSX1.625€29.67
ASDSX1.562€29.67
ASDSX1.500€29.67
ASDSX1.437€29.67
ASDSX1.375€29.67
ASDSX1.312€29.67
ASDSX1.250€29.67
ASDX.812€35.67
ASDX.937€35.67
ASDSX1.125€29.67
ASDX1.687€35.67
ASFX.625€56.60
See more

Features

Martin Sprocket Tapered Bushings

  • These flush-mounted bushings have a silt taper that reduces mounting width and a tight clamp to shafts.
  • They are made of sintered steel for providing excellent strength and resistance.
  • They feature a bore with a keyway that locks the shaft to prevent it from rotating in the bushing.
  • These tapered bushings are interchangeable and can be mounted to a pulley, sheave or sprocket on a drive shaft.

TB Woods QD Bushings

  • These Sure-Grip Series QD bushings comprise a set screw over the key to secure the bushing's position on the shaft until the screws are tightened.
  • They have a split-flange and taper design to provide a true clamp on the shaft, with twice the force as compared to standard bushings.
  • These bushings come with drilled and tapped holes which allow a bushing in each end to be mounted on a common shaft with two keyways in line. They thus facilitate installation / removal as well as permit both bushings to carry a uniform load on each end.

We are here to help!

Looking for a part not listed here?

Chat with us now

Popular Search Queries

Explore More