DAYTON Speed Reducers And Gear Drives

Used for lowering the rotational speed of input shaft and increasing the power transmitted to output shaft. Offered in different horsepower variants with a maximum input rotational speed of 1800 rpm

Dayton speed reducers optimise the speed and performance of the equipment by transmitting power from its main shaft to the input shaft of the reducer. The die cast aluminium housing in powdered epoxy paint offers durability and longevity. These parallel / inline reducers convert the power to a lower output speed while transmitting to a connected load through the shaft. The indirect drive standard duty motors can produce a maximum torque of 998 in-lb at 1/2 HP power rating. They are capable of rotating their shaft in both clockwise and counterclockwise directions. Dayton hardened steel helical gears are provided with Klubersynth UH1 6-460 lubrication and ball bearings for smooth operation. Choose from a wide range of inline speed reducers, available in input power ratings of 0.3, 0.5, 0.75 and 1 HP on Raptor Supplies.

Dayton speed reducers are designed to optimise speed and performance while increasing equipment longevity. These units feature a motor that transmits power to the input shaft of the reducer. The reducer converts the power to low output speed while transmitting to a connected load through the shaft. These units have cast iron housing to offer structural rigidity and strength. They are equipped with worm gears that provide a high ratio of speed reduction.

Dayton speed reducers enhance the speed and performance of an equipment and offers durability. They are designed as per AGMA standards featuring heavy-duty steel pinions for superior efficiency. These speed reducers transform the power to a lesser output speed while transmitting to a connected load with the help of a shaft. Choose from a range of these speed reducers, available in 1, 0.75, 0.5 and 0.3 HP input power variants.

Dayton speed reducers are designed to enhance speed and performance while increasing durability of an eqipment. These speed reducers transform the power to a lesser output speed while transmitting to a connected load with the help of a shaft. They have heavy-duty and ground steel gear material and powdered epoxy paint finish for corrosion resistance. Choose from a range of these speed reducers, available in 3/4, 5/8, 7/8, 1 and 1.25 inch shaft diameters.