Dwyer Instruments Pitot Tubes | Raptor Supplies

Where We Deliver

Email Phone
Onboard Raptor as a vendor

DWYER INSTRUMENTS Pitot Tubes

Pitot tubes, also known as pitot probes, are a flow measurement device used to measure the fluid flow velocity in wind tunnel experiments. These tubes are made of corrosion-resistant stainless steel with permanently etched insertion depth graduations for withstanding erosive conditions. They have silver soldered connections for a leak-proof operation and require no additional calibration due to the ASHRAE-rated tip design. Choose from a wide range of these pitot tubes available in duct diameters of 10, 12, 12.5 and 14 inches on Raptor Supplies, an authorised Dwyer Instruments distributor.

Filter

DWYER INSTRUMENTS -

160 Series Stainless Steel Pitot Tubes

DWYER INSTRUMENTS 166-6-CFA
StyleModelItemPrice (ex. VAT)
A166-6-CFPocket-size Pitot Tube€201.26
A160-12Standard Pitot Tube€156.82
A160-18Standard Pitot Tube€148.24
A160-36Standard Pitot Tube€165.26
A160-8Standard Pitot Tube€157.22
A160-24Standard Pitot Tube€161.84
A160-48Standard Pitot Tube€182.36
A167-6Standard Pitot Tube€161.54
A167-12Standard Pitot Tube€161.54
A160-120Standard Pitot Tube€1,082.43
A160-12-CFStandard Pitot Tube€180.03
A160-168Standard Pitot Tube€2,548.97
A160-216Standard Pitot Tube€3,115.04
A160-24-CFStandard Pitot Tube€199.80
A160-60Standard Pitot Tube€285.38
RFQ
A160-96Standard Pitot Tube€813.91
DWYER INSTRUMENTS -

MAFS Series Metal Averaging Flow Sensors

DWYER INSTRUMENTS MAFS-04A
StyleModelAccuracyDuct Dia.Insert LengthProbe LengthPrice (ex. VAT)
AMAFS-04-/+ 2% Full Scale4"4"4"€87.72
AMAFS-28-/+ 2% Full Scale28"28"28"€221.06
AMAFS-46-/+ 2% Full Scale46"-46"€343.56
AMAFS-44-/+ 2% Full Scale44"-44"€324.66
AMAFS-42-/+ 2% Full Scale42"-42"€313.53
AMAFS-40-/+ 2% Full Scale40"-40"€297.01
AMAFS-38-/+ 2% Full Scale38"-38"€284.41
AMAFS-36-/+ 2% Full Scale36"-36"€260.42
AMAFS-34-/+ 2% Full Scale34"-34"€257.18
AMAFS-32-/+ 2% Full Scale32"-32"€247.07
AMAFS-30-/+ 2% Full Scale30"30"30"€237.87
AMAFS-26-/+ 2% Full Scale26"26"26"€210.41
AMAFS-24-/+ 2% Full Scale24"24"24"€222.94
AMAFS-22-/+ 2% Full Scale22"22"22"€194.87
AMAFS-20-/+ 2% Full Scale20"-20"€176.01
AMAFS-18-/+ 2% Full Scale18"-18"€171.60
AMAFS-16-/+ 2% Full Scale16"16"16"€158.29
AMAFS-14-/+ 2% Full Scale14"-14"€141.61
AMAFS-12-/+ 2% Full Scale12"-12"€131.17
AMAFS-10-/+ 2% Full Scale10"-10"€97.52
AMAFS-08-/+ 2% Full Scale8"-8"€112.30
AMAFS-06-/+ 3% Full Scale6"-6"€110.48
AMAFS-48-/+ 3% Full Scale48"-48"€350.72
DWYER INSTRUMENTS -

PAFS-1000 Series Averaging Flow Sensors

DWYER INSTRUMENTS PAFS-1002A
StyleModelDuct Dia.Insert LengthLengthTemp. RangePrice (ex. VAT)
APAFS-10023.156"3.156"3 5/32"40° to 120°F€15.35
APAFS-10035.406"-5 13/32"40°F to 120°F€17.45
APAFS-10047.656"-7 21/32"40°F to 120°F€22.41
APAFS-10059 29/32"-9 29/32"40°F to 120°F€29.43
APAFS-100612 1/2"-12 1/2"40°F to 120°F€58.28
APAFS-100714 3/4"-14 3/4"40°F to 120°F€68.98
APAFS-100817 1/8"-17 1/8"40° to 120°F€68.98
APAFS-100919.406"-19 13/32"40°F to 120°F€86.46
APAFS-101021.656"21.656"21 21/32"40°F to 120°F€95.36
APAFS-101123.906"23.906"23 29/32"40°F to 120°F€102.95
DWYER INSTRUMENTS -

160S Series 'S' Type Stainless Steel Pitot Tubes

DWYER INSTRUMENTS 160S-18PMA
StyleModelPrice (ex. VAT)
A160S-18PM€1,263.63
A160S-36PM€1,494.59
A160S-36€482.68
A160S-72€663.35
DWYER INSTRUMENTS -

DS Series In-Line Flow Sensors

DWYER INSTRUMENTS DS-300-3A
DWYER INSTRUMENTS DS-300-4B
StyleModelPipe SizePrice (ex. VAT)
ADS-300-33"€386.97
BDS-300-44"€495.86
DWYER INSTRUMENTS -

Tubes

DWYER INSTRUMENTS AFG-2A
DWYER INSTRUMENTS 166TB
StyleModelPrice (ex. VAT)
AAFG-2€1,058.32
B166T€599.74
DWYER INSTRUMENTS -

Pitot Tube, Standard, 5/16 Inch Diameter, 18 Inch Length

Pitot Tube, Standard, 5/16 Inch Diameter, 18 Inch Length
ModelItemPrice (ex. VAT)
160FAH8GLD€295.99

Features

Dwyer Instruments 160 Series Pitot Tubes

  • They are equipped with connections that are silver soldered for leakproof operations.
  • These Dwyer 160 Series pitot tubes feature stainless steel construction for structural rigidity and resisting corrosion on exposed surfaces.
  • They have ASHRAE design tips for reducing calibration downtime.
  • The static pressure port is parallel to the sensing tube to allow easy alignment of the tube with airflow.

Dwyer Instruments MAFS Series Flow Sensors

  • These flow sensors feature dual bard connection type for minimising the risk of leaks or disconnections during operation.
  • They have a gasket maximum temperature of -31 degrees to 230 degrees F, allowing reliable sealing even in environments with fluctuating temperatures.
  • These MAFS Metal Averaging sensors offer Grade AA6063, constructed from high-quality aluminum alloy, ensuring durability and corrosion resistance.
  • They have a maximum flow design of 12000 FPM for applications with demanding airflow conditions, ensuring accurate measurements.

We are here to help!

Looking for a part not listed here?

Chat with us now

Popular Search Queries

Explore More