TEXAS PNEUMATIC TOOLS Parts

Texas Pneumatic Tools backhead bolts offer strong clamping force with the combination of nuts to create a strong bolted joint between the backhead and the driver chunk in tools like hammer drill. These units come with hexagonal heads that can be rotated from any angle for loosening or tightening in tight spaces with the help of a wrench. When mated with the compatible nuts, these bolts provide extra friction to resist unwinding due to external forces. Selected models come with nut and washer assembly for equally distributing the load of bolt and preventing self loosening due to vibrational effects.

Texas Pneumatic Tools bolts are used for holding objects / materials together, or positioning objects. These metal fasteners offer structural rigidity and corrosion resistance. They comprise a head at one end & a chamfer at the other end, and have a shaft with an external helical ridge.

Texas Pneumatic Tools replaceable foreheads are suitable for replacing worn or damaged foreheads in TX-C9 rock drill machine. These alloy steel forged units provide durability in tough environments and absorb shock, as well as vibrations to protect the operator from any potential injury. Selected models are cushioned with a bushing to reduce friction and prevent wear for extended service life. Choose from a wide range of these foreheads, available in forehead bare, forehead compete and forehead w/ bushing style variants.

Texas Pneumatic Tools hardware assemblies include nuts, screwed securely onto the associated bolts for quick access at the time of need. The alloy steel forged units provide durability and added strength to the units. These threaded bolts create a positive engagement with the nuts when a rotational force is applied to them and prevent loosening or misplacement of components during storage, transit or operation.

Texas Pneumatic Tools center plates fit in between the upper and lower valve blocks in a backfill tamper tool to provide support and allow rotary movement with respect to the body of the tool.

Texas Pneumatic Tools air inlet screens provide long-lasting, weather-resistant & easy-clean external mesh filters to fit air handling units, blowers, fans, dry air coolers and air conditioning units. They stop debris such as pollen, leaves, insects, litter or other air contaminants from entering through the air inlets and clogging coils and internal components of the electrical equipment.

Texas Pneumatic Tools bolt retainers are designed to keep bolts & screws in place, in HVAC, automotive, construction and electrical applications. They feature a one-piece design to eliminate the need for multiple small parts, thereby reducing inventory space. They have inner teeth that bite onto the bolts or screws to ensure a secure, vibration-free connection.

Clamping screws from Texas Pneumatic Tools feature a full ball point contact for workpiece fixing and positioning. These screws feature threads in the form of a helix to allow transmission of lateral movement along the axis of the screw.

Texas Pneumatic Tools forehead bolts are used for securely bolting the front head to the lower portion of the cylinder in paving breakers. These replacement bolts create a strong clamping force with the combination of nuts and provide extra friction to resist unwinding (self-loosening) due to external forces. Selected models come with a nut and washer assembly for equally distributing the load of the bolt and dampening shocks & vibrations.

Texas Pneumatic Tools dowel pins are ideal for joining and keeping machine components aligned. These cylindrical pins are made of hardened steel to provide superior tensile strength and prevent shattering of pins under high stress. They feature a chamfered end for easy insertion into reamed holes. The brand's long pins allow damaged holes to open wider and accommodate new pins; can easily fasten onto softer materials or oblong holes.

Texas Pneumatic Tools handle grips are easy to install and feature a non-slip rubber coating for easy gripping. They reduce the risk of injury to hands and wrists.

Texas Pneumatic Tools rubber bumpers are used in stretchers and vehicles for shock absorption, cushioning and edge protection of internal machines. They usually feature a circular shape, which may or may not have a small hole in the centre. These bumpers also protect floors against damage caused by machines & equipment.

Texas Pneumatic Tools spring retainers attach chisel bits to the barrel of a compatible air-powered hammer. These units provide a friction fit to securely hold chisels on an air-powered hammer and feature metal coils that twist onto the hammer barrel. They hold the chisel bits in place to prevent them from flying off the tool during use.

Texas Pneumatic Tools rivet buster retainers are designed to fit a standard riveting hammer and rivet busters. These units feature high-grade steel construction that is further hardened to provide reliable performance & durability. They can withstand shocks and fit both threaded & grooved barrels.

Texas Pneumatic Tools side rod kits are suitable replacements for worn out parts in paving breakers used for demolition applications. These kits include fronhead bolt springs, hex nuts, lock washers and bolts.

Texas Pneumatic Tools needle drivers are suitable replacements for worn out drivers in scaling hammers used for cleaning castings, welding slags and de rusting metals. They feature one piece construction for resisting bending / breaking while ensuring long term operation.

Texas Pneumatic Tools needle springs are suitable replacements for worn out springs in scaling hammers used for cleaning castings, welding slags and de rusting metals. They have one piece construction that offers durability and prevents the spring from loosing tension over time.

Texas Pneumatic Tools backhead assemblies feature adjustable ends to connect to the source of pressurised fluids. They have distilled ends with reciprocating bits to control to strike the workpieces while using maximum forces. These backheads are connected with hollow wear sleeves by threaded connections that extend the distal ends to form an exterior shank or surface of the machine. Choose from a wide range of these assemblies, also available in push & lever type backhead assembly variants.

Texas Pneumatic Tools bolts & nuts are suitable replacements used for fastening components together in paving breaker & chipping hammer tools. Selected bolts feature hex head design for enabling easy installation & fastening and black oxide finish for high abrasion resistance.

Texas Pneumatic Tools lock nuts keep the fasteners from loosening under constant vibration, excessive pressure or torque. These nuts firmly grasp the bolt threads and provide extra friction to resist unwinding and are also called reversible lock nuts as they can be fastened on the bolt from either side. Some of the lock nuts are hex shaped with higher torque capabilities and are specifically designed for parts exposed to excessive jerks.

Texas Pneumatic Tools square head plugs attach at the ends of pipes, shafts, tubes or connectors and provide safety in high-pressure air, water and natural gas systems. These threaded square plugs are made of high-quality metal for a steady performance and high thermal resistance. They further feature a galvanised zinc plating for rust protection and a simple design that requires little maintenance. Raptor Supplies offers an array of these hydraulic plugs in 1/4, 3/4, 3/8 and 1 inch sizes.

Texas Pneumatic Tools easy change retainers provide a solid chuck that securely grips bits in the barrel of an air-powered hammer, while allowing tool-free bit changes. They are suitable for fast and simple attachment / removal of the chisel. These units allow quick replacement by releasing the upper release ring.