TB WOODS Motion Control Couplings

Ruland Manufacturing DCD Series motion control couplings remove misalignment between two shafts. The balanced one-piece design reduces vibration at high speeds, provides zero backlashes and easily fits on the shaft without causing marring. The double disc mechanism in the centre is comprised of 2 anodised aluminium hubs, 2 sets of thin stainless steel disc springs and a centre spacer to accommodate misalignment. They are held in place via cap screws and have a spiral slot in the centre to dampen vibrations. Choose from a wide range of 1-piece motion control couplings, available in 25, 50, 100 and 180 inch-lb torque ratings on Raptor Supplies.

Ruland Manufacturing coupling hubs are designed for connecting shafts for torque transmission applications. These are one of the components for the three-piece design comprising 2, anodised aluminium hubs & a centre disk. These couplings can accommodate high parallel misalignments and operate with low bearing loads, thereby protecting sensitive system components. They have lightweight aluminium construction and black oxide finish for preventing abrasive fluids & particles from damaging the coupling hubs. Choose from a wide range of these coupling hubs, available in 7/8, 3/4, 5/8, 1/2 & 1 inch bore diameters.

Ruland Manufacturing OCT Series coupling oldham clamps are three-piece flexible shaft couplings employed to connect shafts in mechanical power transmission assemblies. They comprise two anodised aluminium hubs which press fit onto a centre disk. These couplings can operate under low bearing loads when securing sensitive system components and feature a balanced design for reduced vibration. They are available in 0.750, 1.000, 1.313, 1.625 and 2.250 inch clearance diameters.

Ruland Manufacturing coupling hubs are designed for connecting shafts for torque transmission applications. These are one of the components for three-piece design comprising 2, anodised aluminium hubs & a centre disk. These couplings operate with low bearing loads, thereby protecting sensitive system components like bearings and can accommodate high parallel misalignments. They have lightweight, 2024-T351 aluminium construction with black oxide finish for preventing abrasive fluids & particles from damaging the coupling hubs. Choose from a broad range of these coupling hubs, available in 7/8, 5/8, 3/4, 1/2 & 1 inch bore diameters.

Ruland Manufacturing coupling hubs are designed for connecting shafts for rotary torque transmission applications. These are one of the components for the three-piece design comprising 2, anodised aluminium hubs & a centre disk. These couplings operate with low bearing loads, thereby protecting sensitive system components like bearings and can accommodate high parallel misalignments. They have lightweight, 2024-T351 aluminium construction and black oxide finish for preventing abrasive fluids & particles from damaging the coupling hubs. Choose from a broad range of these coupling hubs, available in 5/16, 3/8, 5/8, 3/4 & 1/2 inch bore diameters.

Ruland Manufacturing P Series 4 beam couplings are used for running robots, computers, metering devices and medical equipment. These couplings provide zero backlash and feature a balanced design for minimising vibrations in devices working at a maximum speed of 6000 rpm. They are made from aluminium / stainless steel for corrosion resistance and fix angular misalignment up to 3 degrees. These motion control couplings deliver torques ranging between 5.5 & 92 inch-lb and can withstand temperatures up to 350 degrees F. Variants are available in outside diameters ranging from 0.75 to 31.8 inches.

Lovejoy ES Series single beam set screw style couplings protects the shaft support bearings from damaging thrust and radial load due to misalignment and axial motion. These motion control couplings have a zero-backlash design to correct angular misalignments up to 7 degrees and are coated with anodized aluminium finish ensuring heat resistance and chemical stability. They facilitate easy one-piece installation while delivering nominal torque up to 17 in-lbs. Choose from a wide range of these single beam clamp style couplings available in outside diameters of 19, 23, 32 and 38 inches on Raptor Supplies.

Lovejoy double beam couplings are suitable for power transmission & accommodating parallel, angular & axial misalignment for stepper drives, encoders and servo drives. These motion control couplings feature one-piece aluminium construction and offer two flex points for accommodating up to 7 degrees angular misalignment and zero-backlash design for safe & fail-proof operation. Choose from a wide variety of these couplings, available in outside diameter ranging from 12.7 to 38.1 mm on Raptor Supplies.

Lovejoy ES-Series mini disc style couplings are used to run computers, robots, metering devices and medical equipment. These motion control couplings feature zero backlash design to correct parallel and angular misalignments up to .012 inches and 2 degrees, respectively. Further, they feature aluminium hubs with stainless steel discs to offer torsional stiffness up to 22125 in-lbs/rad and are capable of withstanding temperatures up to 300 degrees F. Choose from a wide range of these mini disc style couplings, available in variants delivering speed ranging from 2400 to 4800 rpm on Raptor Supplies.

Lovejoy Oldham couplings are used to connect two drive shafts for transmitting torque while accomodating parallel misalignment, absorbing shock and providing electrical isolation. These units feature two aluminium hubs with a polyacetal slotted disc allowing full-free movement of the hubs and providing torsional stiffness and high torque capacity at a maximum temperature of 176 degrees F. They further come with an anti-backlash design for eliminating the need of additional lubrication; ideal for use with shaft encoders, medical equipment and stepper motors. Choose from a wide range of these MOL Series couplings available in 3/16 to 1/2 inch bore diameters on Raptor Supplies.

Set screw style six beam couplings from Ruland Manufacturing are RoHS 3 & REACH compliant for light-duty power transmission applications. These units have a balanced design for reduced vibration at high speeds and two sets of three spiral cuts for high torque capacity & low windup. They test beyond DIN 912 12.9 standards and consist of multiple beam cuts to improve parallel misalignment capabilities. These couplings are made of 7075 aluminium for light weight & low inertia, and 303 stainless steel for increased torque capability.