Electromagnetic Lock Power Supplies

Altronix eBridge EoC port receivers are designed for auto detection & protection of legacy non-PoE cameras / devices and transmit data & power over coax cables in PoE compliant formats. They are powered by UL-listed power sources, as well as connected by RJ45 & auto-crossover ethernet connectors for compatibility & additional protection from harsh environments. These receivers are integrated with LED indicators through which controlling & viewing data logging becomes easy. They can operate at temperatures ranging from -20 degrees to 49 degrees Celsius. The throughputs are rated to pass at least 25Mbps up to 500 meter distance and requires Cat5 wire cables for high transmission of speed.

Altronix EoC hardened transceivers are designed to transmit data over Coax cables and provide power in a PoE / PoE+ compliant format to an enabled device / camera. These units feature a plug and play feature to facilitate hassle-free installation. Selected models can support up to two PoE or PoE+ cameras / devices or a single Hi-PoE (60W) device. They also feature built-in IP management for remote camera reset, monitoring and reporting via various IP protocols.

Altronix ReServ video surveillance UPS units are used as emergency power backup for running cameras during power outage, as well as maintaining camera synchronisation. These units feature a combination of multiple AC & DC PTC ports, producing true sine wave outputs rated 24VAC @ 4A and 12VDC @ 2A. They are equipped with rechargeable lead acid or gel batteries, a built-in charger and an automatic switchover feature to stand-by battery when AC fails. The LED indicators and audible alarm provide notification of failure / trouble.

Altronix eBridge IP over coax receivers transmit data & power over coax cables and facilitate system upgrades from analogue to IP devices or cameras by utilising existing legacy coax. They eliminate the labour & costs during the installation of a new network cable and enable power & data transmission extended over 500 meters. Further, these CE-approved & UL-listed receivers extend network link distances in industrial environments and upgrade deployed CCTV coax to digital networks for airports, hospitals, schools & casinos, working along with megapixel, HD1080 & HD720 cameras. They feature RJ45 type ethernet connectivity for compatibility & additional protection in harsh environments and LED indicators to indicate the proper point-to-point functioning of the devices. Additionally, these C-Tick compliant devices are equipped with type 16 channels, allowing them to have 16 cameras on one system and the throughputs are rated to pass up to 25 Mbps over long distances. Choose from a wide range of these devices with operating temperatures ranging from 14 degrees Fahrenheit to 122 degrees Fahrenheit, available in 1 & 16 output variants.

Altronix access power integration kits are designed to accommodate various combinations of CDVI Atrium A22K/A22NB/ADH10 boards for up to four doors in a single enclosure. These pre-assembled kits consist of Trove1 enclosures / backplanes with factory-installed Altronix power supplies / chargers and sub-assemblies. These units automatically switch over to a stand-by battery when AC power fails. There is zero voltage drop when the unit switches over to battery backup.

Altronix ACM Series power supplies / chargers are ideal for switching and distributing power to access control systems and accessories. They convert a 115VAC, 60Hz input into eight independently controlled 12VDC or 24VDC fuse protected outputs. These power outputs can be converted to dry form C-contacts and are activated by open collector sinks or open dry trigger inputs from card readers, access control systems, push button and keypads. They route power to a variety of access control hardware devices including mag locks and magnetic door holders. The outputs operate in both Fail-Safe and Fail-Secure modes for an adjustable voltage output. The FACP (fire alarm control panel) interfaces enable emergency egress, alarm monitoring & to trigger other auxiliary devices. The fire alarm disconnects are individually selectable for any or all of the eight outputs along with relay indicators to prevent overvoltages & overcurrent faults.

Altronix triple output power supplies / chargers are used with access control systems & accessories and convert 115VAC / 60 Hz input voltage into three individually PTC protected, 5VDC, 12VDC & 24VDC regulated output voltages. They feature steel construction to withstand corrosion and are compatible with sealed, lead acid or gel type batteries. These UL-listed chargers have battery percentage displays and feature low battery supervisions through form C contacts to trigger reporting or signalling devices. They prevent AC failures due to overvoltage & overcurrent faults and are integrated with LED indicators, indicating triggered DC outputs and operate on temperatures ranging from 0 degree Celsius to 49 degrees Celsius. Variants are available in enclosure depths of 3.25 and 4.50 inches.

Altronix AL1012ULX Series power supplies are designed for converting a 115VAC, 60 Hz input into PTC protected or 1 / 4 / 8 / 16 fused outputs. These power supplies feature AC fail supervision to monitor voltage and an alarm to indicate failure. They are equipped with a built-in charger for gel or sealed lead acid batteries and ensure thermal overload & short circuit protection. They allow automatic switchover to the stand-by battery in case of AC failure and can be operated at temperatures ranging from 0 to 49 degrees C.

Altronix AL300ULX Series power supplies are used for converting a 115VAC, 60 Hz input into 1 / 4 / 8 / 16 fused or PTC protected outputs. These power supplies feature steel / phenolic / fibreglass construction for mechanical strength and corrosion resistance. They are integrated with a built-in charger for gel or sealed lead acid batteries and provide thermal overload & short circuit protection. They switch automatically over to stand-by battery in case of AC failure and are capable of being operated at temperatures ranging from 32 to 120 degrees F. They are available in enclosure heights of 13.5 & 15.5 inches.

Altronix AL400UX Series power supplies are used for converting a 115VAC, 60Hz input signal into four Class 2 rated 12 or 24VDC power limited outputs. These power supplies provide AC fail supervision to monitor voltage and sound an alarm upon failure. They are integrated with a built-in charger for gel or sealed lead acid batteries and ensure thermal overload & short circuit protection. These UL listed power supplies facilitate automatic switching over to the stand-by battery in case of AC failure and can be operated at temperatures ranging from 0 to 49 degrees C.

Altronix AL600ULX Series power supplies are designed for converting a 115VAC, 60Hz input into PTC protected or 1 / 4 / 8 / 16 fused outputs. These power supplies provide AC fail supervision to monitor voltage and sound an alarm upon failure. They are equipped with a built-in charger for gel or sealed lead acid batteries and ensure thermal overload & short circuit protection. They allow automatic switching over to the stand-by battery in case of AC failure and can be operated at temperatures ranging from 0 to 49 degrees C.

Altronix ALTV2416 Series AC CCTV power supplies deliver 24VAC or 28VAC voltage distributed through 16 fused protected outputs for powering heaters, CCTV cameras and various video accessories. They feature steel construction with grey finish for corrosion resistance and provide relative humidity up to 85% (+/- 5%). These CE listed power supplies are equipped with power On/Off switches to provide surge protection and are capable of being operated at temperatures ranging from 32 to 120 degrees F. Choose from a wide range of these electromagnetic lock power supplies, available in enclosure heights of 8.5 & 13.5 inches.

Altronix Vertiline CCTV rack mount power supplies provide 16 fuse, protected power outputs in space saving, rack mount chassis that can also be wall or shelf mounted. They feature individually selectable, 24VAC or 28VAC power outputs with surge suppression to resist increasing temperatures. These UL-listed devices protect against short circuits & thermal overloads and provide filtered and regulated outputs for a smooth DC power supply. They offer illuminated, master power disconnect circuit breakers with manual reset switches for default settings and removable terminal blocks with locking screw flanges to secure the wires together. Choose from a wide range of these power supplies with operating temperatures of 0 to 49 degrees C and are available in 50Hz & 60Hz input frequencies.