ALTRONIX Electromagnetic Lock Power Supplies

Includes a variety of Altronix power supplies, controllers, timers, relays, fuses and transceivers with different input frequencies

Altronix AL125UL Series access control power supply chargers are used to convert 115VAC, 50 / 60Hz input into 2 individually PTC protected 12VDC & 24VDC outputs. They are suitable for applications that require an interface with fire alarm control panels. The built-in charger houses gel or sealed lead acid batteries and facilitates automatic switching over to the stand-by battery in case of AC failure. These power supply chargers can be operated at temperatures ranging from 0 to 49 degrees C.

Altronix linear power supplies / chargers are ideal for access control and security applications. They convert a 115VAC, 50 / 60Hz input to a 12VDC, 2.5A, filtered & electronically regulated output. These power supplies / chargers facilitate automatic switching over to the stand-by battery in case of AC failure, and can be operated at temperatures ranging from 0 to 49 degrees C. The built-in charger stores gel or sealed lead acid batteries and ensures thermal overload & short circuit protection. Variants are available in enclosure heights of 12 and 15.5 inches.

Linear power supplies / chargers from Altronix are designed to convert a low voltage AC input into a 12VDC or 24VDC output. They provide filtered and electronically regulated output. These units can limit overload and short circuit currents to provide thermal overload and short circuit protection. They come with a built-in charger for sealed lead acid or gel batteries. These units are integrated with LED indicators to show AC input and DC output.

Altronix NAC power extenders / supplies are cost-effective, voltage regulated, remote power extenders for notification appliance, circuit expansions and provide auxiliary power to support system accessories. They feature steel construction to reduce oxidation on the exposed surfaces and can connect to any 24V volt fire alarm control panel (FACP). These CE-approved extenders have 2-wire sync modes, allowing audible notification appliances (horns) and visual notification appliances (strobes) to be silenced or deactivated simultaneously. Additionally, they offer ground fall detections for preventing damage to the electrical components and the signal circuit, trouble memories help identify intermittent loop problems. These power supply devices utilise sealed, lead acid or gel type back up batteries for excellent heat conduction and the common trouble inputs or outputs for external, trouble signal tie-ins. These LED indicators turn on / off while carrying electricity and are available in 6, 8 & 10A output current ratings.

Altronix off-line power supplies / chargers are designed for applications requiring additional power, such as security systems and access controls. These power supplies / chargers feature phenolic / fibreglass construction for mechanical strength & corrosion resistance. They are equipped with a built-in charger for gel or sealed lead acid batteries and provide thermal overload & short circuit protection. These power supplies / chargers offer relative humidity up to 85% (+/- 5%).

Altronix WayPoint outdoor power supplies provide voltages distributed via two, Class 2 rated, PTC protected, power-limited outputs to power heaters, CCTV cameras and other video accessories. They feature fiberglass reinforced polyester construction to reduce environmental impacts and have individual power output LED indicators for proper point-to-point functioning. These power supplies are further equipped with illuminated master power switches to transfer the loads and are available in 24VDC & 28VAC voltage outputs.

Altronix UTP passive transceiver hubs have integral camera power to transmit UTP video, RS422 / RS485 data and power over a single Cat-5 or higher structured cable. These hubs feature individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression for protection from voltage spikes. The video transmission range is up to 750 ft per channel. These hubs have a rack mount chassis for rack, wall or shelf mounting.

Altronix UTP passive transceiver hubs are used to transfer UTP video, power and data over a single CAT-5 or high structured cable for high speed transmission. They provide 8 camera channels in space saving, wall or rack mount enclosures with video transmissions up to 750 feet per channel. These devices feature individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression to resist increasing temperatures. The optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit video from 4 cameras at a time over a single CAT-5 or high structured cable and provide power to minimise the possibility of voltage drops, associated with long cable runs.

Altronix power distribution modules are used for powering electromagnetic locks and installing / repairing electromagnetic door locks. They feature steel / phenolic / fibreglass construction for mechanical strength & resisting corrosion on exposed surfaces. These power distribution modules are integrated with LED indicators to show AC input & DC output. They provide relative humidity up to 85% (+/- 5%) and can be operated at temperatures ranging from 0 to 49 degrees C.

Altronix power supply chargers are used for powering, installing and repairing electromagnetic door locks. The built-in charger houses gel or sealed lead acid batteries and delivers relative humidity up to 85% (+/- 5%). These supplies or chargers can be operated at temperatures ranging from 32 to 120 degrees F and are coated with grey finish for resisting corrosion on exposed surfaces.

Altronix offers power supply units to provide power via 4 protected outputs for CCTV cameras, heaters and video accessories. These CCTV power supplies come with three Class 2 rated power limited outputs that are PTC protected to offer resettable overcurrent protection. These units feature a NEMA 4 rated enclosure for outdoor use. These units are integrated with an illuminated master power function to disconnect the circuit breaker with a simple manual reset.

Altronic video balun / combiners are UL listed accessories used to transmit video, data & power to 24VAC fixed or PTZ indoor / outdoor cameras. These units are compatible with HubWay and HubSat UTP transceiver hubs, for use with 24VAC cameras. These units feature a green power LED indicator to inform about the unit's running status. They are made of plastic and can handle temperatures ranging from 32 to 120 degrees Fahrenheit.

Altronix multi-output power supply chargers convert 115V AC, 60 Hz input into four, 12VDC or 24VDC, Class 2, power outputs. They feature filtered & electronically regulated outputs for a smooth DC power supply and provide protection from short circuits & thermal overloads. These devices offer automatic switch overs to stand-by batteries during AC failures and have built-in chargers for sealed, lead acids or gel type batteries. The visual relay indicators prevent overvoltage & overcurrent faults. They provide low battery supervisions through form C contacts to trigger reporting or signaling devices. Choose from a broad range of these chargers having operating temperatures ranging from 0 degree to 49 degrees Celsius.

Altronix access power distribution modules with power supplies / chargers are used for powering, installing & repairing access control systems and accessories. These multi-output power supplies can be operated in both Fail-Secure & Fail-Safe modes for adjustable voltage output. These controllers provide thermal overload & short circuit protection and can house gel or sealed lead acid batteries in the built-in charger. They deliver relative humidity up to 85% (+/- 5%) and are available in enclosure widths of 12 & 13 inches.

Altronix power supplies with 8 PTC outputs convert 115VAC, 60Hz inputs into eight independently controlled 12VDC or 24VDC, non-power limited fuse protected outputs. These outputs operate in both fail-safe and fail-secure outputs with up to 10A continuous supply current. The fire alarm disconnects enable emergency egress, alarm monitoring & triggering other auxiliary devices in the events where the fire alarm systems are activated and are individually selectable for any or all of the eight outputs. The power supplies catalogue also includes Vertiline rack mount, DC power supplies providing eight filtered & electronically regulated power outputs in space-saving, rank mount chassis. These rack mounts offer illuminated, master power disconnect circuit breakers with manual reset switches for default settings and removable terminal blocks with locking screw flanges to secure the wires. Choose from a wide range of these power supply devices, available in grey and black finishes.

Altronix power supply chargers / boards convert 115VAC, 60 Hz input into single 12VDC non power-limited voltage outputs. They feature phenolic or fibreglass construction, ensuring excellent electrical insulation and filtered & electronically regulated outputs for a smooth DC power supply. These boards protect from short circuits & thermal overloads and have built-in chargers for sealed, lead acids or gel type batteries. They offer automatic switch overs to stand-by batteries during AC failures and zero voltage drops when switched over to battery backup. Choose from a wide range of these power supply boards with operating temperatures ranging from 0 degree to 49 degrees Celsius and are available in 12VDC & 24VDC voltage outputs.

Altronix CCTV power supplies provide 12VDC, 24VAC & 28VAC voltages, distributed via sixteen or eighteen fuses or Class 2, PTC protected outputs for powering surveillance cameras, heaters, and other video accessories. The UL- listed power supplies feature steel construction to withstand corrosion, deliver filtered & electronically regulated outputs for smooth, DC supplies and ensure short circuit & thermal overload protections. Additionally, they maintain camera synchronisations and have 3-wire line cords, ensuring integral strain relief. The catalogue also includes CE-approved, CCTV rack, power supplies, thereby providing surge protection and an illuminated, power disconnect circuit breaker with manual reset. Further, these devices are equipped with removable terminal blocks with locking screw flanges & spare fuses. These wall mounted CCTV power supplies offer individual, power LED indicators for indicating triggered DC outputs. Variants are available in 50 Hz & 60 Hz input frequencies.

Altronix Strikeit panic device controllers operate up to two, 24VDC panic hardware devices simultaneously, as well as handle the demand of high current, surge panic hardware, locking devices. They feature steel construction to withstand corrosion and have un-switched auxiliary voltage outputs for powering keypads, card readers, REX PIRs, relays & electronic timers. Further, these controllers are equipped with LED status, visual indicators to monitor AC power, FACP (fire alarm control panels) status and for lockout wiring supervisions. They come with built-in chargers and sealed, lead acid or gel type batteries. They can automatically switch over to stand-by batteries for up to 30 minutes during AC failures. The brand's Strikeit1 Panic Device Controller includes follower relays for each output to trigger external relays and can control automatic door operators that are locked or unlocked during the working days. Additionally, they have configurable, FACP interfaces to either provide or remove power to the lock outputs when activated and the intelligence logic ensures protection against accidental shorting of lock outputs.

Altronix power supplies / chargers are designed for converting input power signals into PTC protected outputs. They feature steel / phenolic / fibreglass construction for mechanical strength and corrosion resistance. The built-in charger has gel or sealed lead acid batteries and provides thermal overload & short circuit protection. These power supplies / chargers are capable of being operated at temperatures ranging from 0 to 49 degrees C and are available in grey & red finish variants.

Altronix eBridge EoC port receivers are designed for auto detection & protection of legacy non-PoE cameras / devices and transmit data & power over coax cables in PoE compliant formats. They are powered by UL-listed power sources, as well as connected by RJ45 & auto-crossover ethernet connectors for compatibility & additional protection from harsh environments. These receivers are integrated with LED indicators through which controlling & viewing data logging becomes easy. They can operate at temperatures ranging from -20 degrees to 49 degrees Celsius. The throughputs are rated to pass at least 25Mbps up to 500 meter distance and requires Cat5 wire cables for high transmission of speed.