MICRO 100 Carbide End Mills

Right-handed carbide end mills widely used in slotting, roughing, profiling and finishing applications. Available in both metric and SAE dimensions with options in 2- and 4-flute variants

Filter

MICRO 100 -

Miniature General Purpose Carbide Square End Mills

Style	Model	Price (ex. VAT)
A	MEF-075-600	€50.45
A	MEF-020-250	€47.64
A	MEF-015-100	€59.86
A	MEF-015-200	€63.63
A	MEF-025-250	€46.51
A	MEF-015-023	€51.99
A	MEF-030-045	€34.70
A	MEF-025-038	€37.97
A	MEF-031-047	€34.70
A	MEF-031-375	€49.04
A	MEF-030-375	€47.63
A	MEF-031-100	€41.72
A	MEF-030-100	€42.67
A	MEF-031-200	€43.26
A	MEF-045-150	€42.67
A	MEF-030-200	€44.29
A	MEF-060-350	€46.01
A	MEF-060-500	€50.45
A	MEF-050-075	€33.53
A	MEF-047-071	€34.70
A	MEF-060-750	€60.18
A	MEF-047-150	€41.72
A	MEF-050-300	€43.89
A	MEF-060-200	€42.85
A	MEF-045-068	€34.70

MICRO 100 -

High Performance Roughing/Finishing Carbide Square End Mills

Style	Model	Price (ex. VAT)
A	VLM-500-5K	€140.86
B	VHM-500-5K	€134.59
C	VLR-500-5K	€207.41
D	VHS-500-5K	€111.32
B	VHM-250-5	€49.54
C	VLR-250-5K	€80.28
E	VHS-250-5	€41.75
B	VHM-750-5	€280.44
C	VLR-375-5K	€121.08
F	VHM-625-5K	€189.21

MICRO 100 -

High Performance Roughing Carbide Square End Mills

Style	Model	Price (ex. VAT)
A	SHRM-140-4X	€222.76
A	SHLM-180-4X	€441.25

MICRO 100 -

High Performance Finishing Carbide Square End Mills

Style	Model	Price (ex. VAT)
A	SDHM-180-3X	€246.73
A	SDHM-200-3X	€317.10
B	ARMM-140-5X	€168.20
B	ARMM-180-5X	€277.97

MICRO 100 -

Miniature High Performance Carbide Square End Mills

Style	Model	Price (ex. VAT)
A	MEF-031-047K	€39.61
A	MEF-045-250K	€48.56
A	MEF-047-071K	€40.59
A	MEF-040-500K	€62.49
B	MEF-125-1000K	€64.61
A	MEF-010-075K	€74.37
A	MEF-060-500K	€58.07
C	MEF-078-117K	€41.55
A	MEF-010-050K	€71.86
C	MEF-040-150K	€43.46
A	MEF-062-200K	€48.58
A	MEF-062-350K	€50.12
A	MEF-062-550K	€58.07
A	MEF-045-500K	€56.06
A	MEF-078-400K	€50.22
A	MEF-045-150K	€46.83
A	MEF-040-060K	€40.59
C	MEF-035-150K	€49.05
A	MEF-035-053K	€39.58
A	MEF-045-068K	€40.59
A	MEF-030-100K	€48.74
A	MEF-025-038K	€42.67
A	MEF-015-100K	€65.75
A	MEF-030-045K	€40.59
A	MEF-015-023K	€57.63

MICRO 100 -

High Performance Roughing/Finishing Bright Finish Carbide Corner Radius End Mills

Style	Model	Price (ex. VAT)
A	VLM-500-5-090	€130.08
B	VHS-375-5-020	€54.66
B	VHS-500-5-090	€90.08
C	VHMM-080-5	€52.48
D	VHSM-080-5	€47.11
C	VHMM-060-5	€44.63
D	VHSM-060-5	€42.25
C	VHM-625-5-060	€183.49
E	VLR-312-5-020	€75.24
B	VHS-312-5-020	€50.74
D	VHSM-040-5	€33.97
C	VHMM-040-5	€37.00
E	VLR-375-5-020	€107.41
E	VLR-500-5-060	€189.79
A	VLM-375-5-020	€76.94
C	VHM-750-5-125	€278.66
C	VHMM-120-5	€92.85
B	VHS-250-5-020	€42.51
A	VLM-250-5-020	€57.44
A	VLM-500-5-060	€130.91
B	VHS-500-5-030	€90.41
E	VLR-500-5-090	€189.09
C	VHM-500-5-125	€100.48
E	VLR-500-5-030	€191.72
D	VHSM-120-5	€84.25

MICRO 100 -

High Performance Roughing/Finishing Coated Carbide Corner Radius End Mills

Style	Model	Price (ex. VAT)
A	VLM-500-5-090K	€145.03
B	VHSM-120-5K	€97.77
A	VLM-375-5-020K	€85.95
C	VHMM-080-5K	€63.99
B	VHSM-080-5K	€58.59
C	VHMM-060-5K	€52.59
B	VHSM-060-5K	€48.30
B	VHSM-040-5K	€39.53
C	VHMM-040-5K	€45.93
C	VHMM-120-5K	€109.32
B	VHSM-100-5K	€73.85
D	VLR-500-5-125K	€204.61
E	VHS-312-5-020K	€61.81
A	VLM-312-5-020K	€71.40
C	VHM-375-5-020K	€71.32
E	VHS-375-5-020K	€65.19
D	VLR-375-5-020K	€119.34
E	VHS-500-5-030K	€106.10
D	VLR-500-5-030K	€209.60
D	VLR-500-5-090K	€209.09
E	VHS-500-5-090K	€106.12

MICRO 100 -

High Performance Roughing Carbide Corner Radius End Mills

Style	Model	Price (ex. VAT)
A	ARC-750-5-020X	€319.46
B	ARC-625-5-090X	€214.28

MICRO 100 -

High Performance Finishing Coated Carbide Corner Radius End Mills

Style	Model	Price (ex. VAT)
A	HMCM-1215-4X	€181.72
A	HMCM-1210-4X	€181.72
A	HMCM-1205-4X	€181.72
A	HMCM-1610-4X	€378.66
A	HMCM-1620-4X	€378.66
A	HMCM-2015-4X	€520.13
A	HMCM-2030-4X	€520.13
B	VHMM-250-4X	€457.80
A	HMCM-0815-4X	€130.53
A	HMCM-2020-4X	€520.13

MICRO 100 -

General Purpose Finishing Coated Carbide Corner Radius End Mills

Style	Model	Price (ex. VAT)
A	GEC-250-2-010X	-	RFQ
A	AECM-1215-2X	€104.85
A	AECM-1215-3X	€104.85
A	GEC-031-2-005X	€32.42

MICRO 100 -

Miniature High Performance Carbide Corner Radius End Mills

Style	Model	Price (ex. VAT)
A	MEF-062-750-005K	€66.71
A	MEF-047-250-010K	€53.56
A	MEF-090-400-005K	€54.93
A	MEF-090-650-015K	€59.26
A	MEF-090-650-010K	€59.26
A	MEF-090-650-005K	€61.16
A	MEF-050-300-005K	€53.76
A	MEF-050-300-010K	€53.58
A	MEF-047-250-005K	€53.80
A	MEF-090-400-015K	€54.93
A	MEF-060-200-015K	€52.33
A	MEF-060-200-005K	€50.67
A	MEF-060-750-010K	€66.71
A	MEF-060-750-015K	€66.98
A	MEF-060-750-005K	€66.71
A	MEF-050-075-010K	€46.84
A	MEF-050-550-010K	€60.99
A	MEF-090-400-010K	€53.71
A	MEF-078-117-015K	€43.07
A	MEF-050-200-010K	€50.67
A	MEF-078-650-005K	€62.08
A	MEF-078-400-015K	€55.07
A	MEF-090-900-010K	€69.95
A	MEF-090-900-005K	€71.96
A	MEF-090-900-015K	€69.95

MICRO 100 -

High Performance Roughing/Finishing Carbide Ball End Mills

Style	Model	Price (ex. VAT)
A	BEF-250-500	€55.63
A	BEF-250-750K	€75.38
A	BEF-250-500K	€65.28
B	BEF-250-1000K	€86.78
B	BEF-250-750	€66.67
A	BEF-250-1500K	€98.37
A	BEF-250-1500	€88.49
A	BEF-250-250	€60.17
A	BEF-250-1000	€77.78

MICRO 100 -

High Performance Finishing Carbide Ball End Mills

Style	Model	Price (ex. VAT)
A	MMBM-010-12X	€74.85
B	BEMM-120-3X	€128.48
A	SFBM-003-0X	€115.62
C	BELM-250-4X	€612.85
A	BLRM-060-3X	€84.76
B	BEM-203-03X	€63.54
A	BLRM-200-3X	€505.51
C	BELM-120-3X	€164.75
A	BLRM-120-3X	€184.97
B	BMRM-018-2X	€44.40
A	SFBM-040-10X	€74.11
B	BEM-437-02X	€128.62
C	BELM-250-2X	€612.85
A	BLRM-200-2X	€505.51
B	BEMM-180-2X	€267.43
B	BEMM-160-3X	€220.69
B	BEM-171-02X	€48.67
A	SFBM-004-1X	€112.90

MICRO 100 -

Miniature High Performance Carbide Ball End Mills

Style	Model	Price (ex. VAT)
A	BEF-020-250	€45.81
A	BEF-031-375K	€62.36
B	BEF-125-125	€45.36
C	BEF-125-1000	€73.36
C	BEF-125-375	€59.91
A	BEF-015-023K	€73.34
A	BEF-015-200K	€80.38
A	BEF-015-100	€72.32
A	BEF-015-200	€76.67
A	BEF-040-060K	€47.56
A	BEF-031-100K	€55.47
A	BEF-040-150K	€55.70
A	BEF-040-500K	€66.25
A	BEF-035-250K	€58.23
C	BEF-125-1500	€78.04
A	BEF-031-200K	€59.49
A	BEF-035-400K	€61.87
A	BEF-040-250K	€56.94
A	BEF-035-150K	€55.70
A	BEF-045-068K	€47.56
A	BEF-045-500K	€65.46
A	BEF-045-150K	€55.37
A	BEF-031-200	€53.25
A	BEF-045-250	€53.13
A	BEF-045-500	€59.18

MICRO 100 -

Center Carbide End Mill

Style	Model	Corner Radius	Diameter	Dimension Type	End	End Style	Finish	Helix Angle	Length Of Cut	Price (ex. VAT)
A	BEM-281-04X	-	9/32"	Fractional Inch	Single	Ball Nose	AlTiN Coated	30 Degrees	3/4"	€62.61
B	MMBM-005-10	-	0.5mm	Metric	Single	Ball Nose	Uncoated	30 Degrees	0.5mm	€55.94
C	EMSM-030-4	-	3mm	Metric	Single	Square	Uncoated	30 Degrees	15mm	€20.43
C	EMSM-040-2	-	4mm	Metric	Single	Square	Uncoated	30 Degrees	18mm	€29.68
D	EMSM-060-2X	-	6mm	Metric	Single	Square	AlTiN Coated	30 Degrees	18mm	€40.63
C	EMSM-060-4	-	6mm	Metric	Single	Square	Uncoated	30 Degrees	18mm	€37.48
E	EMSM-060-4X	-	6mm	Metric	Single	Square	AlTiN Coated	30 Degrees	18mm	€46.10
F	MMBM-003-3	-	0.3mm	Metric	Single	Ball Nose	Uncoated	30 Degrees	0.3mm	€72.40
F	MMBM-003-3X	-	0.3mm	Metric	Single	Ball Nose	AlTiN Coated	30 Degrees	0.3mm	€76.08
F	MMBM-004-3	-	0.4mm	Metric	Single	Ball Nose	Uncoated	30 Degrees	0.4mm	€62.38
F	MMBM-004-3X	-	0.4mm	Metric	Single	Ball Nose	AlTiN Coated	30 Degrees	0.4mm	€65.95
F	MMBM-004-8	-	0.4mm	Metric	Single	Ball Nose	Uncoated	30 Degrees	0.4mm	€63.44
F	MMBM-004-8X	-	0.4mm	Metric	Single	Ball Nose	AlTiN Coated	30 Degrees	0.4mm	€66.04
F	MMBM-005-10X	-	0.5mm	Metric	Single	Ball Nose	AlTiN Coated	30 Degrees	0.5mm	€57.26
D	EMSM-020-2	-	2mm	Metric	Single	Square	Uncoated	30 Degrees	10mm	€21.55
F	MMBM-005-5	-	0.5mm	Metric	Single	Ball Nose	Uncoated	30 Degrees	0.5mm	€54.03
B	MMBM-005-5X	-	0.5mm	Metric	Single	Ball Nose	AlTiN Coated	30 Degrees	0.5mm	€59.91
F	MMBM-006-12X	-	0.6mm	Metric	Single	Ball Nose	AlTiN Coated	30 Degrees	0.6mm	€58.57
F	MMBM-006-5	-	0.6mm	Metric	Single	Ball Nose	Uncoated	30 Degrees	0.6mm	€54.03
F	MMBM-006-5X	-	0.6mm	Metric	Single	Ball Nose	AlTiN Coated	30 Degrees	0.6mm	€58.38
F	MMBM-007-5	-	0.7mm	Metric	Single	Ball Nose	Uncoated	30 Degrees	0.7mm	€58.43
F	MMBM-008-10	-	0.8mm	Metric	Single	Ball Nose	Uncoated	30 Degrees	0.8mm	€46.94
F	MMBM-008-5	-	0.8mm	Metric	Single	Ball Nose	Uncoated	30 Degrees	0.8mm	€46.69
F	MMBM-008-5X	-	0.8mm	Metric	Single	Ball Nose	AlTiN Coated	30 Degrees	0.8mm	€50.96
F	MMBM-010-11	-	1mm	Metric	Single	Ball Nose	Uncoated	30 Degrees	1mm	€51.69

MICRO 100 -

Non Center Carbide End Mill

Style	Model	Diameter	Dimension Type	Finish	Length Of Cut	List Number	Number Of Flutes	Overall Length	Shank Dia.	Price (ex. VAT)
A	SDH-500-03	1/2"	Fractional Inch	Uncoated	1"	SDH	3	3"	1/2"	€93.17
B	SDH-500-03X	1/2"	Fractional Inch	AlTiN Coated	1"	SDH	3	3"	1/2"	€108.45
A	SDH-500-04	1/2"	Fractional Inch	Uncoated	1"	SDH	4	3"	1/2"	€104.15
A	SDH-500-04X	1/2"	Fractional Inch	AlTiN Coated	1"	SDH	4	3"	1/2"	€117.04
C	SDH-250-03	1/4"	Fractional Inch	Uncoated	3/4"	SDH	3	2.5"	1/4"	€42.78
A	SDH-250-03X	1/4"	Fractional Inch	AlTiN Coated	3/4"	SDH	3	2.5"	1/4"	€48.42
A	SDHM-060-3	6mm	Metric	Uncoated	18mm	SDHM	3	57mm	6.00mm	€34.39
A	SDHM-120-4	12mm	Metric	Uncoated	30mm	SDHM	4	83mm	12.00mm	€78.66
A	SDHM-160-3X	16mm	Metric	AlTiN Coated	35mm	SDHM	3	92mm	16.00mm	€171.13

MICRO 100 -

DM Drill Point End Mill

Style	Model	Diameter	Finish	Length Of Cut	Number Of Flutes	Overall Length	Shank Dia.	Price (ex. VAT)
A	DM-500-490	1/2"	Uncoated	1"	4	3"	1/2"	€124.94
B	DM-500-490X	1/2"	AlTiN Coated	1"	4	3"	1/2"	€131.21
A	DM-500-290X	1/2"	AlTiN Coated	1"	2	3"	1/2"	€127.35
B	DM-500-290	1/2"	Uncoated	1"	2	3"	1/2"	€106.30
C	DM-250-290	1/4"	Uncoated	3/4"	2	2.5"	1/4"	€45.06
D	DM-250-290X	1/4"	AlTiN Coated	3/4"	2	2.5"	1/4"	€51.78
A	DM-250-490	1/4"	Uncoated	3/4"	4	2.5"	1/4"	€50.81
E	DM-250-490X	1/4"	AlTiN Coated	3/4"	4	2.5"	1/4"	€65.01
C	DM-125-290	1/8"	Uncoated	1/2"	2	1.5"	1/8"	€30.82
D	DM-125-290X	1/8"	AlTiN Coated	1/2"	2	1.5"	1/8"	€30.97
F	DM-125-490	1/8"	Uncoated	1/2"	4	1.5"	1/8"	€32.95
E	DM-125-490X	1/8"	AlTiN Coated	1/2"	4	1.5"	1/8"	€28.09
B	DM-750-490	3/4"	Uncoated	1.5"	4	4"	3/4"	€326.48
B	DM-750-290X	3/4"	AlTiN Coated	1.5"	2	4"	3/4"	€343.91
A	DM-750-290	3/4"	Uncoated	1.5"	2	4"	3/4"	€338.17
A	DM-750-490X	3/4"	AlTiN Coated	1.5"	4	4"	3/4"	€322.35
C	DM-375-290	3/8"	Uncoated	1"	2	2.5"	3/8"	€66.80
D	DM-375-290X	3/8"	AlTiN Coated	1"	2	2.5"	3/8"	€86.48
G	DM-375-490	3/8"	Uncoated	1"	4	2.5"	3/8"	€79.92
E	DM-375-490X	3/8"	AlTiN Coated	1"	4	2.5"	3/8"	€83.14
E	DM-187-490X	3/16"	AlTiN Coated	5/8"	4	2"	3/16"	€45.06
F	DM-187-490	3/16"	Uncoated	5/8"	4	2"	3/16"	€45.94
D	DM-187-290X	3/16"	AlTiN Coated	5/8"	2	2"	3/16"	€39.88
C	DM-187-290	3/16"	Uncoated	5/8"	2	2"	3/16"	€38.82
B	DM-625-290X	5/8"	AlTiN Coated	1.25"	2	3.5"	5/8"	€241.03

MICRO 100 -

DMM Drill Point End Mill

Style	Model	Diameter	End	Finish	Length Of Cut	Number Of Flutes	Overall Length	Shank Dia.	Price (ex. VAT)
A	DMM-030-2120	3mm	120 Degrees Included	Uncoated	8mm	2	38mm	3.00mm	€33.07
A	DMM-030-490	3mm	90 Degrees Included	Uncoated	8mm	4	38mm	3.00mm	€34.47
A	DMM-030-490X	3mm	90 Degrees Included	AlTiN Coated	8mm	4	38mm	3.00mm	€35.28
A	DMM-030-290	3mm	90 Degrees Included	Uncoated	8mm	2	38mm	3.00mm	€33.07
B	DMM-030-4120X	3mm	120 Degrees Included	AlTiN Coated	8mm	4	38mm	3.00mm	€35.72
B	DMM-030-4120	3mm	120 Degrees Included	Uncoated	8mm	4	38mm	3.00mm	€31.10
A	DMM-030-290X	3mm	90 Degrees Included	AlTiN Coated	8mm	2	38mm	3.00mm	€29.73
A	DMM-040-2120	4mm	120 Degrees Included	Uncoated	11mm	2	50mm	4.00mm	€40.83
A	DMM-040-2120X	4mm	120 Degrees Included	AlTiN Coated	11mm	2	50mm	4.00mm	€42.75
A	DMM-040-290	4mm	90 Degrees Included	Uncoated	11mm	2	50mm	4.00mm	€46.27
A	DMM-040-4120	4mm	120 Degrees Included	Uncoated	11mm	4	50mm	4.00mm	€48.32
A	DMM-040-490	4mm	90 Degrees Included	Uncoated	11mm	4	50mm	4.00mm	€46.09
A	DMM-040-490X	4mm	90 Degrees Included	AlTiN Coated	11mm	4	50mm	4.00mm	€48.37
A	DMM-040-290X	4mm	90 Degrees Included	AlTiN Coated	11mm	2	50mm	4.00mm	€46.57
C	DMM-050-2120	5mm	120 Degrees Included	Uncoated	13mm	2	57mm	6.00mm	€41.91
B	DMM-050-2120X	5mm	120 Degrees Included	AlTiN Coated	13mm	2	57mm	6.00mm	€59.79
B	DMM-050-290	5mm	90 Degrees Included	Uncoated	13mm	2	57mm	6.00mm	€47.61
A	DMM-050-290X	5mm	90 Degrees Included	AlTiN Coated	13mm	2	57mm	6.00mm	€59.79
B	DMM-060-290X	6mm	90 Degrees Included	AlTiN Coated	16mm	2	57mm	6.00mm	€57.69
B	DMM-060-490X	6mm	90 Degrees Included	AlTiN Coated	16mm	4	57mm	6.00mm	€56.39
C	DMM-060-2120X	6mm	120 Degrees Included	AlTiN Coated	16mm	2	57mm	6.00mm	€49.54
C	DMM-060-290	6mm	90 Degrees Included	Uncoated	16mm	2	57mm	6.00mm	€48.74
A	DMM-060-2120	6mm	120 Degrees Included	Uncoated	16mm	2	57mm	6.00mm	€51.73
A	DMM-080-4120X	8mm	120 Degrees Included	AlTiN Coated	22mm	4	63mm	8.00mm	€71.87
B	DMM-080-490	8mm	90 Degrees Included	Uncoated	22mm	4	63mm	8.00mm	€71.64

MICRO 100 -

GELM Series, End Mill

Style	Model	Diameter	Finish	Length Of Cut	Number Of Flutes	Overall Length	Shank Dia.	Price (ex. VAT)
A	GELM-040-2X	4mm	AlTiN Coated	25mm	2	75mm	4.00mm	€41.35
B	GELM-060-3	6mm	Uncoated	25mm	3	75mm	6.00mm	€47.45
C	GELM-060-4	6mm	Uncoated	25mm	4	75mm	6.00mm	€47.76
B	GELM-080-3	8mm	Uncoated	30mm	3	75mm	8.00mm	€56.81
B	GELM-100-3X	10mm	AlTiN Coated	38mm	3	100mm	10.00mm	€86.33

MICRO 100 -

GEL Series, End Mill

Style	Model	Diameter	Finish	Length Of Cut	Number Of Flutes	Overall Length	Shank Dia.	Price (ex. VAT)
A	GEL-500-2X	1/2"	AlTiN Coated	3"	2	6"	1/2"	€128.60
B	GEL-500-2	1/2"	Uncoated	3"	2	6"	1/2"	€111.75
C	GEL-250-4	1/4"	Uncoated	1.5"	4	4"	1/4"	€60.02
D	GEL-375-2	3/8"	Uncoated	1.75"	2	4"	3/8"	€69.90
A	GEL-375-2X	3/8"	AlTiN Coated	1.75"	2	4"	3/8"	€73.27
A	GEL-187-2X	3/16"	AlTiN Coated	1.125"	2	3"	3/16"	€41.08
E	GEL-312-4	5/16"	Uncoated	1.625"	4	4"	5/16"	€52.07

MICRO 100 -

GEC Series, End Mill

Style	Model	Corner Radius	Diameter	Finish	Length Of Cut	Number Of Flutes	Overall Length	Shank Dia.	Price (ex. VAT)
A	GEC-031-3-005	0.005"	1/32"	Uncoated	5/64"	3	1.5"	1/8"	€29.18
B	GEC-093-4-005X	0.005"	3/32"	AlTiN Coated	3/8"	4	1.5"	1/8"	€26.63
C	GEC-031-4-005	0.005"	1/32"	Uncoated	5/64"	4	1.5"	1/8"	€29.49
B	GEC-031-4-005X	0.005"	1/32"	AlTiN Coated	5/64"	4	1.5"	1/8"	€36.54
D	GEC-062-2-005	0.005"	1/16"	Uncoated	3/16"	2	1.5"	1/8"	€28.18
E	GEC-062-3-005	0.005"	1/16"	Uncoated	3/16"	3	1.5"	1/8"	€28.81
A	GEC-062-3-005X	0.005"	1/16"	AlTiN Coated	3/16"	3	1.5"	1/8"	€26.78
B	GEC-062-4-005	0.005"	1/16"	Uncoated	3/16"	4	1.5"	1/8"	€27.33
B	GEC-062-4-005X	0.005"	1/16"	AlTiN Coated	3/16"	4	1.5"	1/8"	€32.32
A	GEC-031-3-005X	0.005"	1/32"	AlTiN Coated	5/64"	3	1.5"	1/8"	€36.54
D	GEC-187-4-010X	0.01"	3/16"	AlTiN Coated	5/8"	4	2"	3/16"	€36.89
F	GEC-250-2-010	0.01"	1/4"	Uncoated	3/4"	2	2.5"	1/4"	€52.76
B	GEC-250-4-010	0.01"	1/4"	Uncoated	3/4"	4	2.5"	1/4"	€42.15
B	GEC-250-4-010X	0.01"	1/4"	AlTiN Coated	3/4"	4	2.5"	1/4"	€57.73
D	GEC-312-2-010	0.01"	5/16"	Uncoated	13/16"	2	2.5"	5/16"	€48.16
G	GEC-375-2-010X	0.01"	3/8"	AlTiN Coated	7/8"	2	2.5"	3/8"	€64.03
G	GEC-312-2-010X	0.01"	5/16"	AlTiN Coated	13/16"	2	2.5"	5/16"	€57.73
D	GEC-312-4-010	0.01"	5/16"	Uncoated	13/16"	4	2.5"	5/16"	€48.53
B	GEC-312-4-010X	0.01"	5/16"	AlTiN Coated	13/16"	4	2.5"	5/16"	€57.47
G	GEC-375-2-010	0.01"	3/8"	Uncoated	7/8"	2	2.5"	3/8"	€66.38
B	GEC-375-4-010	0.01"	3/8"	Uncoated	7/8"	4	2.5"	3/8"	€53.63
B	GEC-375-4-010X	0.01"	3/8"	AlTiN Coated	7/8"	4	2.5"	3/8"	€64.00
D	GEC-500-4-010	0.01"	1/2"	Uncoated	1"	4	3"	1/2"	€94.23
C	GEC-187-4-010	0.01"	3/16"	Uncoated	5/8"	4	2"	3/16"	€55.47	RFQ
D	GEC-500-4-010X	0.01"	1/2"	AlTiN Coated	1"	4	3"	1/2"	€132.22

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

MICRO 100 Carbide End Mills

Right-handed carbide end mills widely used in slotting, roughing, profiling and finishing applications. Available in both metric and SAE dimensions with options in 2- and 4-flute variants

Miniature General Purpose Carbide Square End Mills

High Performance Roughing/Finishing Carbide Square End Mills

High Performance Roughing Carbide Square End Mills

High Performance Finishing Carbide Square End Mills

Miniature High Performance Carbide Square End Mills

High Performance Roughing/Finishing Bright Finish Carbide Corner Radius End Mills

High Performance Roughing/Finishing Coated Carbide Corner Radius End Mills

High Performance Roughing Carbide Corner Radius End Mills

High Performance Finishing Coated Carbide Corner Radius End Mills

General Purpose Finishing Coated Carbide Corner Radius End Mills

Miniature High Performance Carbide Corner Radius End Mills

High Performance Roughing/Finishing Carbide Ball End Mills

High Performance Finishing Carbide Ball End Mills

Miniature High Performance Carbide Ball End Mills

Center Carbide End Mill

Non Center Carbide End Mill

DM Drill Point End Mill

DMM Drill Point End Mill

GELM Series, End Mill

GEL Series, End Mill

GEC Series, End Mill

We are here to help!

Looking for a part not listed here?

Explore More

Select your cookie preferences

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

MICRO 100 Carbide End Mills Right-handed carbide end mills widely used in slotting, roughing, profiling and finishing applications. Available in both metric and SAE dimensions with options in 2- and 4-flute variants

We are here to help!

Looking for a part not listed here?

Explore More

MICRO 100 Carbide End Mills

Right-handed carbide end mills widely used in slotting, roughing, profiling and finishing applications. Available in both metric and SAE dimensions with options in 2- and 4-flute variants